Daikin One Lite Smart Thermostat Instruction Manual

1

2

3

4

5

6

7

8

Daikin One Lite  

Connected Thermostat  

AUX Heat Wiring Diagram &  

Instructions  

© 2023 Daikin Comfort Technologies North America, Inc.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Daikin One Lite Smart Thermostat Instruction Manual
Make	Daikin
Language	English
Filetype	PDF (Download)
File size	0.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Daikin

Daikin One Lite Smart Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Daikin One Lite Connected thermostat AUX heat wiring diagram & instructions
• Page 2: Disclaimer This material provides technical information for trained and certified HVAC-R installers and technicians. Users must agree to the terms and conditions to view or use this material. The material does not cover everything necessary for proper installation or repair of HVAC-R equipment. It should not be considered recommendations for best practices. Installers and technicians are responsible for ensuring proper installation or repair. Users assume responsibility for any injury or damage resulting from their installation. The material may not address every possible scenario or environment encountered. Recording, copying, or distribution of this material is prohibited without permission from Daikin.
• Page 3: Aux wiring involves the thermostat's Aux output, which is a dry contact that activates the Aux equipment. A 24V AC control signal must be routed through the aux contact of the thermostat. The terminals are selected in the Daikin One Lite installer app. It is recommended to use a minimum of 18-gauge wire, and standard non-stranded thermostat wire is acceptable. The maximum operating length of wire is 125 ft.
• Page 4: Connect app to thermostat AP mode Press and hold the fan button for 5 seconds. Release the fan button and press the down button to continue. Approximately 10 seconds to enter AP mode. On your mobile device, tap “Discover Device”. When connecting to the thermostat's access point, the mobile device must be within two feet. Tap “Join” to pair the device with the thermostat's network.
• Page 5: Connect to Wi-Fi Once the profile is sent to the thermostat, you will have the option to set up Wi-Fi through the homeowners' network.
• Page 6: Apply system profile. A list of the connected equipment will be populated once connected to Wi-Fi. Verify equipment, then continue to view thermostat profile options. Once connected to Wi-Fi, the green icon will be displayed. If access is expired, then the user will see the no access icon.
• Page 7: You can select and or modify any profile to send to the thermostat. Make edits as needed, then tap “Send to Thermostat.” Modifying the profile does not affect the default profile.