COPELAND P-N 810-1600 Programmable Touchscreen Thermostat User Guide
Modbus Device Baud Rate
The second configuration menu allows users to change the
Modbus device baud rate. “br” is shown on the right side of
the display to indicate which parameter is being changed
(br stands for Baud Rate). To change the value, press either
the up or down arrow, and then press the check icon to go to
the next parameter. Press CA to cancel and exit the
configuration menu without saving any changes.
Table 7: Modbus Baud Rate
Menu Option Number
Corresponding Baud Rate
9600 bps
19200 bps (default)
0
1
Figure 8 - Modbus Rate Configuration Menu
Thermostat System Configuration
The third configuration menu allows users to set the
thermostat system configuration. SC is shown on the right
side of the display to indicate which parameter is being
changed (SC stands for System Configuration). The current
revision of the Programmable Touchscreen Thermostat
supports Conventional HVAC Systems such as RTU and
Heat-pump Systems using a reversing valve. There are 4x
possible configurations: IDLE, RTU, HP_O and finally HP_B.
The first system configuration is IDLE. In this configuration, all
the outputs of the thermostats are open and the thermostat
controls are inactive. This is to prevent any issues within the
current configuration compared to the equipment connected
to the thermostat. To change the value, press either the up or
down arrow, and then press the check icon to go to the next
parameter. Press CA to cancel and return to the normal
display without saving any changes.
•
When the system is not configured, for example,
configured in IDLE, all other configurations are
accessible through the menu as below:
Table 10: Thermostat System Configuration
Menu Option
Number
Corresponding Baud Rate
0
1
2
3
IDLE
RTU (Conventional Systems)
*HP_O (Heat-pump with O as reversing signal)
*HP_B (Heat-pump with B as reversing signal)
Figure 11 - Configuration Menu with Options 0-IDLE, 1-RTU, 2-HP-O,
3-HP-B
Figure 9 - Thermostat System Configuration Menu
NOTE: By default, the thermostat is configured as 2 heat-
stages and 2 cool-stages thermostat. The number of
heating/cooling stages can be changed in the
subsequent menus.
026-4850 R2
4
©2024 Copeland LP.
| General | Details |
|---|---|
| Name | COPELAND P-N 810-1600 Programmable Touchscreen Thermostat User Guide |
| Make | Copeland |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.3 MB |
(1 votes, average: 5.00 out of 5)
Loading...
COPELAND 1F95G-1235GC Humidity Universal Thermostat Instruction Manual
COPELAND ST55 Sensi Smart Thermostat Instruction Manual
COPELAND 1F76U-22WFB Series Sensi Lite Smart Thermostat Installation Guide
COPELAND 026-1739 Programmable Touchscreen Thermostat User Manual
COPELAND 1F86-0244 Blue 2 Inch Single Stage Thermostat Instruction Manual
AURATON Cetus P Wired Thermostat User Manual
tado Wired and Wireless Smart Thermostat User Guide
GENERAL LIFE Mitra 260S RF Wireless Room Thermostat User Manual
PRO1 T805 Non Programmable Thermostat Instruction Manual
GENERAL LIFE HT220S RF Digital Room Thermostat User Manual
Wyze Thermostat User Guide
ENGO CONTROLS EASYBATB Wired Thermostat User Guide
KINGHOME WK-010WD1 Smart Thermostat Owner’s Manual
CYDATA DAISY Wi-Fi Enabled Thermostat Installation Guide
HWGL2 Hotwire Thermostat Instructions