BEOK CONTROLS TDR83 WiFi Heating Thermostat User Guide

1

2

3

technicians.  

3.After installation, please read this manual carefully and operate the product  

according to the instructions.  

TDR83 WIFI THERMOSTAT USER GUIDE  

Caution: Risk of electric shock or equipment damage.  

Wiring Diagram  

Note: WP for water heating; EP for electric heating; WPB for gas boiler  

THIS THERMOSTAT IS SUITABLE FOR WATER HEATING, ELECTRIC  

HEATING AND GAS BOILER  

Installation procedure  

This product is installed with a standard 86 control switch (in compliance with  

European regulations).  

Welcome  

Thank you for your trust and support. By adopting higher-end technology and  

more perfect technology, your new thermostat will provide you with the right  

temperature environment every day in the future, making your life more  

comfortable and your living environment more stylish and beautiful. For detailed  

instructions on the installation and use of this thermostat, please read this manual  

carefully. Please contact a professional to install the thermostat for you and install  

and use the product to the extent permitted by law.  

1.  

2.  

3.  

4.  

1. Slide the mounting plate upward in this direction.  

2. Remove the mounting plate in this direction.  

3. Fix mounting plate to cassette with screw.  

4. After installation, buckle the product in this direction.  

Application  

Intelligent digital temperature controller is a floor heating system suitable for room  

temperature control and household temperature control. It controls the operating  

state of the floor heating equipment by comparing the ambient temperature with  

the set temperature, which improves comfort and achieves energy saving. This  

digital temperature controller adopts microcomputer control technology and is  

equipped with full-screen display touch buttons, which is elegant in design and  

easy to use. The thermostat has manual automatic, programmable and state  

memory functions.  

Description of display & Icon  

Product packaging  

Thermostat host  

Sensing line (optional)  

Screw 2 PCS  

1 PC  

Qualification certificate  

Manual 1 PC  

1 PC  

Operating Instruction  

1 PC  

1. Power on/off: press  

to turn on/off the thermostat.  

2. Press the key to switch between manual and automatic modes.  

3. In the automatic mode, press  

or  

to adjust the temperature to enter the  

automatic temporary mode. This mode runs for only one session.  

Product Model  

WP Plumbing 3A  

4. Long press  

key and  

key to enter the clock setting, press key to  

EP Electric Heating 16A  

WPB linkage, gas boiler 3A  

switch Settings Item, press  

and  

keys to adjust the value of each  

parameter. Note: the time of WIFI model will be Automatically gets Internet time  

5. Press  

and  

for 5 seconds to add or cancel the child lock.  

button for 5 seconds and  

User Notes  

6. WIFI link: When the thermostat is on, long press  

1.Please read this manual carefully. Improper operation may damage the product  

or cause dangerous conditions.  

the thermostat display will come out Now the WIFI icon flashes, at this time the  

thermostat into the state of code.  

2.The installation personnel must be well-trained and experienced service  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BEOK CONTROLS TDR83 WiFi Heating Thermostat User Guide
Make	BEOK CONTROLS
Language	English
Filetype	PDF (Download)
File size	0.18 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• BEOK CONTROLS

BEOK CONTROLS TDR83 WiFi Heating Thermostat User Guide Overview

Summary of Contents

• Page 1: After installation, please read this manual carefully and operate the product according to the instructions. This thermostat is suitable for water heating, electric heating, and gas boiler. The product is installed with a standard 86 control switch in compliance with European regulations. The intelligent digital temperature controller is suitable for room temperature control and household temperature control. It controls the operating state of the floor heating equipment by comparing the ambient temperature with the set temperature. This digital temperature controller adopts microcomputer control technology and is equipped with full-screen display touch buttons. The thermostat has manual automatic, programmable, and state memory functions. Improper operation may damage the product or cause dangerous conditions. The installation personnel must be well-trained and experienced service technicians. For detailed instructions on the installation and use of this thermostat, please read this manual carefully.
• Page 2: Time programming instructions Before using the WIFI thermostat for the first time, set the WIFI signal and configuration through your smart phone or tablet. Press and hold the key to enter the programming setting. Download the APP by searching for Tuya in the App market or scanning the QR Code. If you don't have an APP account, you can register or log in via SMS verification code. The default value of the calibration room temperature is -2 °C, with an adjustable range of 9.9 °C to -9.9 °C. The default temperature limit value is 35 °C, adjustable from 5 °C to 60 °C. Set the default anti-freeze function to OFF, with the option to turn it ON. The system automatically determines the current country/region, but manual selection is also available. Click add device or + on the APP homepage to enter the add device page. Press the up button to adjust the display to restore factory settings.
• Page 3: Find the thermostat product (WIFI model) in the device list. In the specified network mode, the indicator flashes and then click the confirm button on the page. Select the device's work area to connect to the WIFI of the Internet and enter the WIFI password. Click ok to enter the matching network process. If the default mode distribution network is selected, the distribution process APP is shown in figure 1 below. The distribution network successfully displays the interface shown in figure 2. The name of the device can be changed or the location of the room can be selected. If the distribution network fails, the APP will display the page shown in the figure below. You can choose to add or view the help again. If the connection fails, please confirm whether the temperature control device has entered the code matching state.