Amber DT-two Programmable Thermostat User Guide
1.
Room Temp Calibration: Calibrate the room temp detected by room sensor.
Floor Temp Calibration: Calibrate the floor temp detected by floor sensor.
Anti-frozen Switch: This option allows you to turn frost protection on / off.
Anti-frozen Temperature: Adjust the frost protection trigger temperature.
Floor temperature limit: If you choose both sensors, floor temp limit must be set to protect floor.
2.
3.
4.
5.
6.
Temperature Tolerance: The value is 1°C. The thermostat will start to heat when the actual temperature is 1°C
lower than set temperature and stop heating when the actual temperature is 1°C higher than set temperature.
7.
°F / °C: °C and °F can be selected.
8.
Sensor selection:
Floor sensor: Floor sensor must be used when the thermostat is used with electric underfloor heating or is
not installed in the same room as the heated floor.
Room sensor: Heating controlled with the air sensor only.
Both sensors: Controlling roomtemperaturewithfloortemperature limitation as perfloortemperature limit above.
9.
Schedule: Select a weekly timer schedule. There are two options:
7: each day from Mon to Sun can be set individually.
5+1+1: 5 days from Mon to Fri have the same events, Sat and Sun can be set individually.
10.
Time delay: This option is a time delay should you inadvertently make a change that you wish to reverse.
11.
Adaptive function: After several days of installation and use, Adaptive function ensures that the required
temperature has already been reached when the next event begins.
12.
13.
Open window: This function only works when room sensor or air sensor are selected. The thermostat with this
function will shut off automatically for 15 minutes if it detects a sudden drop in temperature.
Language: There are four languages: English/German/Spanish/French.
14 & 15. Power Set & Energy Use: This option allows you to enter the various data used to calculate energy use. Then use
this information to calculate electricity consumption.
16.
17.
Sensor type: This option allows floor sensor type selection if replacing a 3rd party thermostat and cannot
replace the existing floor sensor. Please ensure B3950-10K is selected if using the sensor that came in the box
with this thermostat.
Factory Reset: All parameters are restored to default values.
15
| General | Details |
|---|---|
| Name | Amber DT-two Programmable Thermostat User Guide |
| Make | Amber |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.38 MB |
(1 votes, average: 5.00 out of 5)
Loading...
4512673 Heatit ZM Thermostat 16A User Guide
DAIKIN DTST-ONE-ADA-A One Touch Smart Thermostat Installation Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
vaillant VR 92f/3 Wireless Additional Room Thermostat Instructions
aube technologies TH104PLUS Programmable Thermostat Owner’s Manual
Honeywell TH6100AF2004 T6 Hydronic Programmable Thermostat User Manual
Honeywell ATP921R3100 Evohome WiFi Connected Thermostat User Guide
SALUS ST898ZB Optima S Thermostat Installation Guide
CIELO BM101WA Breez Max Smart Thermostat Installation Guide
SALUS 091FLRF Wireless Room Thermostat User Guide