Home > AFRISO > AFRISO RT 10 D 230 Room Thermostat Instruction Manual

AFRISO RT 10 D 230 Room Thermostat Instruction Manual

2

ELECTRICAL WIRING DIAGRAM

ELECTRICAL CONNECTION WITH WB 10 D

INSTALLATION AND OPERATING MANUAL

953.001.0174 5 Version: 09.2024

Thermostat electrical connection

NTC

Room thermostat RT 10 D 230

Lindenstraße 20,

74363 Güglingen

www.afriso.com

Telephone +49 7135 102-0

Service +49 7135102-211

Telefax +49 7135102-147

info@afriso.de

CAUTION!

SERVICE MENU

The service menu of the thermostat contains advanced settings that modify its operation. To enter the service menu, first switch

You may only use the product if you have fully read and understood these operating instructions. Instruction is also available

on AFRISO websites on the Internet.

oﬀ the thermostat using the button

service menu are shown below.

. Then press and hold the

and

buttons for 5 seconds. The functions available in the

WARNING

Do not make any modifications to the product.

Default

Name

Description of the functions

Possible settings

setting

Verify that the product is not exposed to water.

Work on electrical circuits may only be performed by trained, qualified electricians.

Mains voltage (AC 230 V) can cause serious injury or death.

00: No external NTC sensor (thermostat operates on the

basis of the temperature indication from the internal sensor)

01: The thermostat operates on the basis of temperature

readings from an external NTC sensor (measurement from

the internal sensor is ignored)

Disconnect the mains voltage supply before performing the work and ensure that it cannot be switched on.

SEN

Temperature sensor selection

PRODUCT DESCRIPTION

02: The thermostat works on the basis of temperature

readings from an internal as well as an external sensor

Each room thermostat RT 10 measures the actual ambient temperature on an ongoing basis and compares the reference

temperature to the actual temperature and switches the output to obtain the required reference temperature. In addition

to the reference temperature, you can store timer programs (for example, Day/Night). The display shows various values (for

example, temperature, time, heating mode).

External sensor temperature

limitation (only active at setting 02

in SEN parameter)

OSV

DIF

5÷99°C

1÷9°C

42°C

2°C

An additional NTC temperature probe can be connected to the RT 10 room thermostat (not included in scope of delivery) which

can be used as a floor temperature sensor or as an alternative room temperature sensor, depending on the configuration.

Hysteresis of external sensor

(only active at settings 01 or 02

in SEN parameter)

MOUNTING

Limitation of the maximum

temperature that can be set

SVH

SVL

ADJ

FRE

5÷99°C

35°C

5°C

Limitation of the minimum

temperature that can be set

Correction of the measured

temperature indication

-5÷+5°C

0,0°C

Anti-freeze function

00: Deactivated | 01: Activated

00: When the power supply is restored

the thermostat automatically switches oﬀ

01: When the power supply is restored

the thermostat switches on automatically

PON

Operation aﬅer power loss

DFI

Hysteresis of internal sensor

Relay operation mode

Factory settings

0,5÷3°C

1°C

OPT

FAC

Function inactive

The mounting site of the RT 10 room thermostat must provide protection from the weather. Room thermostat RT 10 is designed

for wall mounting in a standard Ø60 mm electrical box. The room thermostat RT 10 must be mounted at eye level, at least 30

cm away from doors and windows. The room thermostat RT 10 is fixed by means of the fixing holes on the back of

the housing.

08: Cancel | 00: Restore factory settings

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	AFRISO RT 10 D 230 Room Thermostat Instruction Manual
Make	AFRISO
Language	English
Filetype	PDF (Download)
File size	0.12 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Comments are closed.

AFRISO Instructions & User Manuals

Get the free PDF manual for the AFRISO RT 10 D 230 Room Thermostat Instruction Manual and access setup steps, usage instructions, and troubleshooting tips. 👉 View online or download now to keep your thermostat running smoothly!

Afriso RT 10 D 230 Manual: Questions and Answers

Afriso RT 10 D 230 specifications

Power supply	230 V AC
Maximum load	Maximum 3 A 250 V AC
Dimensions	86 x 86 x 40 mm
Weight	163 g
Power consumption	< 0,3 W

Full specifications, page 2

What are the N, L, and NTC terminals on the Afriso RT for?

Neutral, live, and external NTC temperature sensor connection.

Terminal	Function
N	Neutral
L	Live (mains voltage AC 230 V)
NTC	External temperature sensor

Instruction Manual, p. 1

Can I connect an external temperature sensor to the Afriso RT 10 D 230?

Yes. An additional NTC temperature probe can be connected and configured in the service menu via the SEN parameter to work as a floor temperature sensor or alternative room temperature sensor. Instruction Manual, p. 1

Afriso RT 10 D 230 compared with other room thermostats

Specification	Afriso RT 10 D 230	EPH Controls CDT2-24	EPH Controls CDTP2 Hardwired	EPH Controls CRTP2
Power supply	230 V AC	24Vac 50Hz	230Vac 50Hz	2 x AA Alkaline Battery
Maximum load	Maximum 3 A 250 V AC	7A 24Vac	8A 230Vac	8A 230Vac
Dimensions	86 x 86 x 40 mm	84 x 84 x 30mm	84 x 84 x 30mm	84 x 84 x 30mm
Power consumption	< 0,3 W	8 VA	8 VA	8 VA