×
- 1. Vine Smart Control (J-610e Wi-fi Thermostat)
- 2. Electronic Manual And Installation Video (Installation Video → We Are Here To Help)
- 3. Vine App Setup (Ios/android → App Download)
- 4. Vine Thermostat - A Smart Choice For Smart Life! (Here's What You'll Find In The Box: → You May Also Need These Tools:)
- 5. Compatibility Section (C-wire Is Required To Power The Thermostat → Incompatible Wiring And Voltage → Please Check The Wall Plate Of Your Old Thermostat)
- 6. Create An Account (Installation → Step 1 → Switch Off Power)
- 7. Check That Your System Is Off (Remove Your Old Thermostat From The Wall Plate)
- 8. Take A Picture Of The Wiring (Label The Wires)
- 9. Disconnect The Wires And Remove The Old Wall Plate (Mount The New Wall Plate → Compatibility Checker)
- 10. Use The Picture You Took Before As Reference To Wire, The Following Chart Is A Wiring Diagram For Common Systems, Please Make Sure That A C-…
- 11. Single Stage Heat / Two Stage Heat- Furnace / Boiler With C-wire (Combined Single Stage Heat And Single Cool Stage With C-wire → Single Stage / Two Stage Heat Pump With Emergency Heat And Auxiliary Heat With C-wire)
- 12. Single Stage Cool / Two Stage Coolair Conditioner (Dual Fuel System-combined Single Stage Heat Pump And Single Stage Furnace)
- 13. If C-wire Does Not Exist In Your System, Check The Instruction Below:
- 14. Conventional System Without C Wire (Furnace Wiring Terminal → Move G Wire To C Terminal)
- 15. Connect The Wires To The New Wall Plate (Install The Thermostat To The Wall Plate)
- 16. Power On And Enjoy (We Are Here To Help, 24/7! → Website: Www.vineconnected.com → Email: Support@vineconnected.com → Hotline: 1-800-264-3457(09:00am~05:00pm Mon~fri Pst))
- 17. Main Screen (Wi-fi → Night-light Control → Current Date & Time → Current Humidity → Current Temperature → Dial Control)
- 18. Device Initial Setup (Equipment Type)
- 19. If You Have A Furnace Or Boiler: (If You Have A Heat Pump:)
- 20. Dual Fuel System
- 21. Schedule (Date & Time)
- 22. Wi-fi Setup
- 23. Scan (Manual Entry)
- 24. Follow Instructions On The Next Page To Add The Device To Your Account. (Possible Reasons For Wi-fi Connection Failure: → An Account Id Will Appear Once The Connection Is Established Successfully, This Id Is For The Network To Which The Device Has Been Added. → For An Unregistered Device, A Message Will Be Displayed Indicating The Device Needs To Be Registered.)
- 25. Add Device To Your Account (The Temporary Verification Code (tvc) Is A 4-digit Code Randomly Generated Each Time You Enter This Screen, It Expires After 180 Seconds (3 Minutes).)
- 26. Auto Reconnect (Wi-fi Settings)
- 27. Mode Setup (Turn On Cooling When The Current Temperature Rises Above The Setpoint. → Turn On Heating When The Current Temperature Drops Below The Setpoint. → Use Only The Emergency Heat Or Backup Heat Source To Maintain The Heat Setpoint. → Activate The Heating Or Cooling System As Required To Keep Your Home Within The Configured Range Of Setpoint. → Turn The System Off. When The System Is Off, Only The Current Temperature Will Be Displayed On The Home Screen.)
- 28. On The Thermostat: (System Mode Selection → Emergency Heat Mode)
- 29. Fan Setup (On Thermostat → Fan Mode Options)
- 30. Adjust The Temperature
- 31. Temporary Hold And Holding One Temperature
- 32. Menu Setting (Weather → Ez Comfort)
- 33. Programming Schedules
- 34. Setting (Date & Time → Screen → Nightlight → Temperature → Advanced Setting → Reset)
- 35. Advanced Setting (Terminal → Deadband → Fan Delay → Sensor)
- 36. Installer Access (Initial Setup (is) → Sensor Calibration (sc) → Sensitivity Level (ss))
- 37. Message (About)
- 38. App Main Screen (Menu → Lock → Device Date &time → Heating Setpoint → Cooling Setpoint → Schedule)
- 39. Program/adjust A Schedule (Add A New Period → Edit An Existing Period)
- 40. Delete An Existing Period (Copy A Schedule → Save Schedule)
- 41. Device Settings (Date & Time → Temperature Units → Safety Functions)
- 42. Advanced Features (How To Connect To Alexa?)
- 43. Common Commands For Alexa To Control Vine Thermostat
- 44. How To Connect To Google Assistant? (Important Step - Link Action → Choose The Room Where Your Device Is Located, And Then The Skill Will Appear On The Home Control Account To Alexa Skill.)
- 45. Common Commands For Google Home To Control Vine Thermostat
- 46. What This Limited Warranty Entails; Duration Of Coverage (Total Satisfaction Return Policy)
- 47. Warranty Terms (How To Receive Service If You Want To Claim Under This Limited Warranty → What This Limited Warranty Does Not Cover → Disclaimer Of Warranties)
- 48. 6. Limitation Of Damages (7. Limitation Of Liability → 8. Your Rights And This Limited Warranty)
- 49.
- 50.
- 51.
- 52.
×
Vine TJ-610E Smart Thermostat User Manual
Advanced Features
Except from the afore-mentioned basic settings, Vine Smart Wi-Fi Thermostat also provide possibility to connect to
the Alexa and Google Assistant, hence control your room temperature through a simple voice comes true. Follow
our instructions below to get connected with Alexa/Google.
How to connect to Alexa?
1 . Download the Vine Smart Control, create an account, and register your app to the TJ-610E thermostat.
2 . Download Amazon Alexa app and set up your Alexa-enabled device.
3 . Tap "Menu" button on the upper left corner of Alexa app main screen.
4 . IMPORTANT step - link Skill.
1
Tap "Skills" in Alexa app menu.
2
Type and search "Vine Control", then choose and tap "enable" to enable the skill.
3
Enter the Vine Control APP account and password, then tap“Link Now”to link your Vine Control account to
Alexa Skill.
Now you can control your thermostat over Amazon Alexa.
41
| General | Details |
|---|---|
| Name | Vine TJ-610E Smart Thermostat User Manual |
| Make | Vine |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |

Vine Smart Wi-Fi Thermostat with Nightlight TJ-225 User Guide

Vine TJ-560 Smart Thermostat User Manual


EMOS P5683 Surface Mount Thermostat Instructions

AuVerte 003001.C508 Thermostat Installation Guide

KeepRite TSTATIIEWF-01 Ion Gray Smart Thermostat Owner’s Manual

SCHRACK TECHNIK EV103311 Analog Thermostat User Manual

EPH Controls RF1A Programmable RF Thermostat Instruction Manual

SALUS Digital Room Thermostat RT310/RT310RF Installation Guide

GENERALLIFE MITRA 230S RF Wireless Room Thermostat User Manual

Danfoss DEVIreg 330 Electronic Thermostat Installation Guide

DELTA DORE TYBOX 1127 Programmable Thermostat User Guide

GENERAL ARUNA 301S Digital Room Thermostat User Manual
Table of Contents
- 1. Vine Smart Control - J-610e Wi-fi Thermostat →
- 2. Electronic Manual And Installation Video - Installation Vide... →
- 3. Vine App Setup - Ios/android →
- 4. Vine Thermostat - A Smart Choice For Smart Life! - Here's Wh... →
- 5. Compatibility Section - C-wire Is Required To Power The Ther... →
- 6. Create An Account - Installation →
- 7. Check That Your System Is Off - Remove Your Old Thermostat F... →
- 8. Take A Picture Of The Wiring - Label The Wires →
- 9. Disconnect The Wires And Remove The Old Wall Plate - Mount T... →
- 10. Use The Picture You Took Before As Reference To Wire, The Fo... →
- 11. Single Stage Heat / Two Stage Heat- Furnace / Boiler With C-... →
- 12. Single Stage Cool / Two Stage Coolair Conditioner - Dual Fue... →
- 13. If C-wire Does Not Exist In Your System, Check The Instructi... →
- 14. Conventional System Without C Wire - Furnace Wiring Terminal →
- 15. Connect The Wires To The New Wall Plate - Install The Thermo... →
- 16. Power On And Enjoy - We Are Here To Help, 24/7! →
- 17. Main Screen - Wi-fi →
- 18. Device Initial Setup - Equipment Type →
- 19. If You Have A Furnace Or Boiler: - If You Have A Heat Pump: →
- 20. Dual Fuel System →
- 21. Schedule - Date & Time →
- 22. Wi-fi Setup →
- 23. Scan - Manual Entry →
- 24. Follow Instructions On The Next Page To Add The Device To Yo... →
- 25. Add Device To Your Account - The Temporary Verification Code... →
- 26. Auto Reconnect - Wi-fi Settings →
- 27. Mode Setup - Turn On Cooling When The Current Temperature Ri... →
- 28. On The Thermostat: - System Mode Selection →
- 29. Fan Setup - On Thermostat →
- 30. Adjust The Temperature →
- 31. Temporary Hold And Holding One Temperature →
- 32. Menu Setting - Weather →
- 33. Programming Schedules →
- 34. Setting - Date & Time →
- 35. Advanced Setting - Terminal →
- 36. Installer Access - Initial Setup (is) →
- 37. Message - About →
- 38. App Main Screen - Menu →
- 39. Program/adjust A Schedule - Add A New Period →
- 40. Delete An Existing Period - Copy A Schedule →
- 41. Device Settings - Date & Time →
- 42. Advanced Features - How To Connect To Alexa? →
- 43. Common Commands For Alexa To Control Vine Thermostat →
- 44. How To Connect To Google Assistant? - Important Step - Link ... →
- 45. Common Commands For Google Home To Control Vine Thermostat →
- 46. What This Limited Warranty Entails; Duration Of Coverage - T... →
- 47. Warranty Terms - How To Receive Service If You Want To Claim... →
- 48. 6. Limitation Of Damages - 7. Limitation Of Liability →
- 49. Page 49 →
- 50. Page 50 →
- 51. Page 51 →
- 52. Page 52 →






















































