×
- 1. Vine Smart Control (J-610e Wi-fi Thermostat)
- 2. Electronic Manual And Installation Video (Installation Video → We Are Here To Help)
- 3. Vine App Setup (Ios/android → App Download)
- 4. Vine Thermostat - A Smart Choice For Smart Life! (Here's What You'll Find In The Box: → You May Also Need These Tools:)
- 5. Compatibility Section (C-wire Is Required To Power The Thermostat → Incompatible Wiring And Voltage → Please Check The Wall Plate Of Your Old Thermostat)
- 6. Create An Account (Installation → Step 1 → Switch Off Power)
- 7. Check That Your System Is Off (Remove Your Old Thermostat From The Wall Plate)
- 8. Take A Picture Of The Wiring (Label The Wires)
- 9. Disconnect The Wires And Remove The Old Wall Plate (Mount The New Wall Plate → Compatibility Checker)
- 10. Use The Picture You Took Before As Reference To Wire, The Following Chart Is A Wiring Diagram For Common Systems, Please Make Sure That A C-…
- 11. Single Stage Heat / Two Stage Heat- Furnace / Boiler With C-wire (Combined Single Stage Heat And Single Cool Stage With C-wire → Single Stage / Two Stage Heat Pump With Emergency Heat And Auxiliary Heat With C-wire)
- 12. Single Stage Cool / Two Stage Coolair Conditioner (Dual Fuel System-combined Single Stage Heat Pump And Single Stage Furnace)
- 13. If C-wire Does Not Exist In Your System, Check The Instruction Below:
- 14. Conventional System Without C Wire (Furnace Wiring Terminal → Move G Wire To C Terminal)
- 15. Connect The Wires To The New Wall Plate (Install The Thermostat To The Wall Plate)
- 16. Power On And Enjoy (We Are Here To Help, 24/7! → Website: Www.vineconnected.com → Email: Support@vineconnected.com → Hotline: 1-800-264-3457(09:00am~05:00pm Mon~fri Pst))
- 17. Main Screen (Wi-fi → Night-light Control → Current Date & Time → Current Humidity → Current Temperature → Dial Control)
- 18. Device Initial Setup (Equipment Type)
- 19. If You Have A Furnace Or Boiler: (If You Have A Heat Pump:)
- 20. Dual Fuel System
- 21. Schedule (Date & Time)
- 22. Wi-fi Setup
- 23. Scan (Manual Entry)
- 24. Follow Instructions On The Next Page To Add The Device To Your Account. (Possible Reasons For Wi-fi Connection Failure: → An Account Id Will Appear Once The Connection Is Established Successfully, This Id Is For The Network To Which The Device Has Been Added. → For An Unregistered Device, A Message Will Be Displayed Indicating The Device Needs To Be Registered.)
- 25. Add Device To Your Account (The Temporary Verification Code (tvc) Is A 4-digit Code Randomly Generated Each Time You Enter This Screen, It Expires After 180 Seconds (3 Minutes).)
- 26. Auto Reconnect (Wi-fi Settings)
- 27. Mode Setup (Turn On Cooling When The Current Temperature Rises Above The Setpoint. → Turn On Heating When The Current Temperature Drops Below The Setpoint. → Use Only The Emergency Heat Or Backup Heat Source To Maintain The Heat Setpoint. → Activate The Heating Or Cooling System As Required To Keep Your Home Within The Configured Range Of Setpoint. → Turn The System Off. When The System Is Off, Only The Current Temperature Will Be Displayed On The Home Screen.)
- 28. On The Thermostat: (System Mode Selection → Emergency Heat Mode)
- 29. Fan Setup (On Thermostat → Fan Mode Options)
- 30. Adjust The Temperature
- 31. Temporary Hold And Holding One Temperature
- 32. Menu Setting (Weather → Ez Comfort)
- 33. Programming Schedules
- 34. Setting (Date & Time → Screen → Nightlight → Temperature → Advanced Setting → Reset)
- 35. Advanced Setting (Terminal → Deadband → Fan Delay → Sensor)
- 36. Installer Access (Initial Setup (is) → Sensor Calibration (sc) → Sensitivity Level (ss))
- 37. Message (About)
- 38. App Main Screen (Menu → Lock → Device Date &time → Heating Setpoint → Cooling Setpoint → Schedule)
- 39. Program/adjust A Schedule (Add A New Period → Edit An Existing Period)
- 40. Delete An Existing Period (Copy A Schedule → Save Schedule)
- 41. Device Settings (Date & Time → Temperature Units → Safety Functions)
- 42. Advanced Features (How To Connect To Alexa?)
- 43. Common Commands For Alexa To Control Vine Thermostat
- 44. How To Connect To Google Assistant? (Important Step - Link Action → Choose The Room Where Your Device Is Located, And Then The Skill Will Appear On The Home Control Account To Alexa Skill.)
- 45. Common Commands For Google Home To Control Vine Thermostat
- 46. What This Limited Warranty Entails; Duration Of Coverage (Total Satisfaction Return Policy)
- 47. Warranty Terms (How To Receive Service If You Want To Claim Under This Limited Warranty → What This Limited Warranty Does Not Cover → Disclaimer Of Warranties)
×
Vine TJ-610E Smart Thermostat User Manual
Installer Access
To access the Installer Access, click Advanced Settings, enter the Professional Access Code and enter the below
Action code in the parenthesis below to gain access to below setting.
Initial Setup (IS)
Use this code to repeat the initial setup process.
Sensor Calibration (SC)
Ability to adjust temperature readings to improve
sensor accuracy as the thermostat nears the end
of its lifecycle after years of use.
Sensitivity Level (SS)
Ability to adjust how sensitive your thermostat
sensor is to changes in the air temperature. The
lower the level, the more your system cycles to
maintain the setpoint.
35
| General | Details |
|---|---|
| Name | Vine TJ-610E Smart Thermostat User Manual |
| Make | Vine |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |

Vine Smart Wi-Fi Thermostat with Nightlight TJ-225 User Guide

Vine TJ-560 Smart Thermostat User Manual


Honeywell RTH6300B Programmable Thermostat Installation Guide

tuya MTS700N Wireless Thermostat User Manual

HITACHI ATW-RTU-12 Room Thermostat Instruction Manual

Hansgrohe 13125000 Ecostat E Wall Mounted Shower Thermostat Instruction Manual

Aprilaire S84N 1H1C Programmable Single Stage Universal Thermostat Owner’s Manual

AVATTO TRV06 Wireless Smart Radiator Thermostat User Manual

Milesight WT201-868M Smart Thermostat User Guide

CENTER EHE0200123 Wired 7 Day Programmable Thermostat Installation Guide

EUROLAMP HY06BW Digital Heating Smart Thermostat User Manual

Honeywell RTH2300 Thermostat User Guide
Table of Contents
- 1. Vine Smart Control - J-610e Wi-fi Thermostat →
- 2. Electronic Manual And Installation Video - Installation Vide... →
- 3. Vine App Setup - Ios/android →
- 4. Vine Thermostat - A Smart Choice For Smart Life! - Here's Wh... →
- 5. Compatibility Section - C-wire Is Required To Power The Ther... →
- 6. Create An Account - Installation →
- 7. Check That Your System Is Off - Remove Your Old Thermostat F... →
- 8. Take A Picture Of The Wiring - Label The Wires →
- 9. Disconnect The Wires And Remove The Old Wall Plate - Mount T... →
- 10. Use The Picture You Took Before As Reference To Wire, The Fo... →
- 11. Single Stage Heat / Two Stage Heat- Furnace / Boiler With C-... →
- 12. Single Stage Cool / Two Stage Coolair Conditioner - Dual Fue... →
- 13. If C-wire Does Not Exist In Your System, Check The Instructi... →
- 14. Conventional System Without C Wire - Furnace Wiring Terminal →
- 15. Connect The Wires To The New Wall Plate - Install The Thermo... →
- 16. Power On And Enjoy - We Are Here To Help, 24/7! →
- 17. Main Screen - Wi-fi →
- 18. Device Initial Setup - Equipment Type →
- 19. If You Have A Furnace Or Boiler: - If You Have A Heat Pump: →
- 20. Dual Fuel System →
- 21. Schedule - Date & Time →
- 22. Wi-fi Setup →
- 23. Scan - Manual Entry →
- 24. Follow Instructions On The Next Page To Add The Device To Yo... →
- 25. Add Device To Your Account - The Temporary Verification Code... →
- 26. Auto Reconnect - Wi-fi Settings →
- 27. Mode Setup - Turn On Cooling When The Current Temperature Ri... →
- 28. On The Thermostat: - System Mode Selection →
- 29. Fan Setup - On Thermostat →
- 30. Adjust The Temperature →
- 31. Temporary Hold And Holding One Temperature →
- 32. Menu Setting - Weather →
- 33. Programming Schedules →
- 34. Setting - Date & Time →
- 35. Advanced Setting - Terminal →
- 36. Installer Access - Initial Setup (is) →
- 37. Message - About →
- 38. App Main Screen - Menu →
- 39. Program/adjust A Schedule - Add A New Period →
- 40. Delete An Existing Period - Copy A Schedule →
- 41. Device Settings - Date & Time →
- 42. Advanced Features - How To Connect To Alexa? →
- 43. Common Commands For Alexa To Control Vine Thermostat →
- 44. How To Connect To Google Assistant? - Important Step - Link ... →
- 45. Common Commands For Google Home To Control Vine Thermostat →
- 46. What This Limited Warranty Entails; Duration Of Coverage - T... →
- 47. Warranty Terms - How To Receive Service If You Want To Claim... →






















































