Home > Quality Heating > QH Basic Quality Heating CV Clock Thermostat Instruction Manual
QH Basic Quality Heating CV Clock Thermostat Instruction Manual
Advanced settings
Turn off the thermostat and press for 5 sec. Press SET to open the advanced
settings. The screen will turn on and the menu below will open. Use the PRG
button to scroll through the menu items.
Temperature calibration
1.
If desired, you can correct the built-in sensor of the thermostat. This can be
a solution, for example, if you want to equate the thermostat with another existing
thermostat. The range you can correct the sensor is minus 8 degrees Celsius ~ 8
degrees Celsius.
2. Hysteresis Set the switch-on difference. The thermostat will switch on when
the set temperature deviates from the measured room temperature by this value.
3.
Temperature limit Set the desired maximum temperature that can be set.
Adjustable between 25~60 °C. The factory setting is 35 °C. This is only for the type
with external floor sensor on the receiver. Not applicable for central heating
installations.
4.
Program mode on the thermostat can be programmed for different days
separately or the 5 working days and weekend days separately (5+1+1). 4
switching times can be set per day. See program setting instructions and preset
program on page 2.
| General | Details |
|---|---|
| Name | QH Basic Quality Heating CV Clock Thermostat Instruction Manual |
| Make | Quality Heating |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.37 MB |

Quality Heating Plug In Programmable WiFi Thermostat Instruction Manual

Quality Heating PRF-80 Touch Thermostat Instructions








































