oventrop Vindo TH Thermostat Instruction Manual
vindo TH
Technical description
3. Technical description
4. Transport and storage
Temperature range
-10 °C to +50 °C
3.1 Design
Relative air humidity max. 95 % non-condensing
Particles
Store in a dry and dust-protected
place
1
Mechanical
influences
Protected from mechanical
shock
2
3
Radiation
Protected from UV-rays and
direct sunlight
Chemical influences
Do not store together with
solvents, chemicals, acids, fuels
or similar substances
4
5
5. Installation
CAUTION
Risk of burns on hot components!
Touching hot components can cause burns.
Allow the system to cool down.
Wear safety gloves.
!
!
A prerequisite for correct control is that the room
air can flow freely around the thermostat.
1
Turn the handwheel (position
anticlockwise until figure “5” (position
page 5) is aligned with the setting mark (position
2 in Fig. 1 on page 5). This will cause the tappet in
5
in Fig. 1 on page 5)
Fig. 1:
Design
4
in Fig. 1 on
1
Fixing nut M 30 x 1.5
the thermostat to be fully retracted.
Setting mark (with palpable setting aid in the form
of a bar)
2
2
3
Align the thermostat so that the setting mark points
upwards or is clearly visible.
3
4
5
Limiting elements
Figure
Screw the thermostat with the fixing nut (position
Fig. 1 on page 5) onto the thread of the
thermostatic valve. Tighten the fixing nut firmly.
1
in
Handwheel
3.2 Technical data
Technical data
Connection thread
Control range
M 30 x 1.5
+7 °C - +28 °C
0 1 - 5
Indicative scale
Sensor element
Sensor temperature
Liquid sensor
max. +50 °C
Heating medium
temperature
max. +120 °C
101306684-V01.03.2022
5
| General | Details |
|---|---|
| Name | oventrop Vindo TH Thermostat Instruction Manual |
| Make | oventrop |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.15 MB |























