Home > oventrop > oventrop Vindo TH Thermostat Instruction Manual

oventrop Vindo TH Thermostat Instruction Manual

vindo TH  
Operation  
Fig. 6:  
Blocking  
Fig. 4:  
Lower limitation of the control range  
To cancel the blocking, slide the limiting elements  
out of the respective position and reinsert them  
in the position between figures “5” and “0”.  
4
For the upper limitation of the control range, e.g. to  
figure “4”, insert a limiting element into the groove  
after figure “4”. (The groove directly opposite figure “4”  
thus remains free.)  
Fig. 5:  
Upper limitation of the control range  
To cancel the limitations, slide the limiting elements out  
of the respective lower and upper position and reinsert  
them in the position between figures “5” and “0”.  
f
6.6 Blocking of a setting  
The thermostat can be blocked on any graduation  
line, any figure and the frost protection setting.  
If a setting is to be blocked, e.g. to figure “3” (approx.  
20 °C), i.e. if no accidental temperature change is to take  
place, proceed as follows:  
1
2
3
Turn the handwheel until the desired figure is aligned  
with the setting mark.  
Push the limiting elements out of the handwheel with  
a suitable tool or e.g. a ball pen.  
Insert the limiting elements into the grooves to the left  
and right of the figure.  
101306684-V01.03.2022  
7
GeneralDetails
Nameoventrop Vindo TH Thermostat Instruction Manual
Makeoventrop
LanguageEnglish
FiletypePDF (Download)
File size0.15 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

oventrop Vindo TH Thermostat Instruction Manual