oventrop Vindo TH Thermostat Instruction Manual
vindo TH
Operation
6.3 Complete shutoff
6. Operation
To shut off the thermostat completely, set the
handwheel to the “0” position.
f
6.1 Setting of the temperature
NOTICE
To set the desired room temperature, turn the
f
handwheel (position
desired figure (position
5
in Fig. 1 on page 5) until the
in Fig. Fig. 1 on page 5)
Damage to the fitting due to freezing!
In the “0” position, the fitting may freeze if the
room temperature falls below freezing.
4
is aligned with the setting mark (position
2
in Fig. 1 on
page 5).
Use the frost protection setting when the
room temperature may drop below freezing.
!
Note the correspondences between the
respective figures and the desired room
temperature in Fig. 2 on page 6.
6.4 Airing
Use the frost protection setting while airing your room.
ca. 28 °C
6.5 Limitation of the control range
For the desired room temperature control, the thermostat
has two limiting elements (position
3
in Fig. 1 on page
ca. 24 °C
ca. 20 °C
ca. 16 °C
ca. 12 °C
5) with which the comfort range can be set
individually.
The thermostat can be limited to any graduation
line, any figure and the frost protection setting.
Example: The desired room temperature control range
should be between approx. 16 °C (figure “2”) and approx.
24 °C (figure “4”).
The limiting elements are accessible from the outside,
inside the handwheel between figure “5” and “0”.
1
2
Turn the handwheel until a figure within the desired
control range is aligned with the setting mark.
Push the limiting elements out of the handwheel with
a suitable tool or e.g. a ball pen.
ca. 7 °C
Fig. 2:
Figures and room temperature
6.2 Lowering of the temperature
To save heating costs, you should lower the room
temperature, e.g. at night or during longer absences.
Fig. 3:
Removal of the limiting elements
When the frost protection setting is selected,
the thermostat opens the valve a little to prevent
the fitting and system components from freezing
when the room temperature drops below 7 °C.
3
For the lower limitation of the control range, e.g. to
figure “2”, insert a limiting element into the groove
before figure “2”. (The groove directly opposite figure
“2” thus remains free.)
Set the thermostat to position .
f
6
101306684-V01.03.2022
| General | Details |
|---|---|
| Name | oventrop Vindo TH Thermostat Instruction Manual |
| Make | oventrop |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.15 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell N100 Series Non Programmable Thermostat Installation Guide
vtech Installing E-Smart W960 Thermostat User Manual
Wengart TP808 Low Voltage Thermostat User Guide
SALUS CONTROLS IT700 Smart Thermostat Instruction Manual
vtech T961NN50 E-Smart Thermostat Installation Guide
PRO1 R250W Wireless System Thermostat Owner’s Manual
Vaillant VRC 700 Weather Compensating Thermostat Instruction Manual
EZAIoT R7C RGB Colorful LCD Screen Thermostat User Manual
Amana MMW-2 Horizontal Digital Wireless non EMS Wall Thermostat Instruction Manual
BEOK Color TFT-LCD Heating Thermostat User Manual