Home > MI-HEAT > Mi-HEAT M2 Wi-fi Bluetooth Thermostat Instruction Manual

Mi-HEAT M2 Wi-fi Bluetooth Thermostat Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

AP-Modus:

Provided that the connection does not remedy the problem despite the above-mentioned tips on the subject of 5GHz Wifi and Wi-Fi 6, a connection can

alternatively be established via AP mode.

1. Switch off the thermostat (OFF appears in the display).

2. simultaneously press and hold the ▲ and ▼ keys for 5 seconds until the WLAN symbol appears in the display.

3. again hold down the ▲ and ▼ keys simultaneously for 5 seconds, after a moment the WLAN symbol changes to the radio tower symbol.

4. Open the TuyaSmart app and select the "Thermostat (BLE+Wi-Fi)" under "Small household appliance".

5. At the bottom, tap "Confirm that the display is flashing slowly" and then tap "Next".

6. When asked for the WLAN, enter the WLAN name (SSID) and the password of the router and tap on "Next".

7. Tap on "Connect now", the WLAN settings of the smartphone should now be called up automatically. If this is not the case, you have to switch to the Wi-Fi

settings manually; the TuyaSmart app must not be closed.

8. Now connect the WLAN of the thermostat (name is e.g.: SmartLife-????) via the WLAN settings of the smartphone.

9. Switch back to the TuyaSmart app, the app will now search for the device and add it automatically.

10. Finally, tap on "Finish".

Download instructions as PDF:

Disposal note

Do not dispose of this device in household waste! Electronic devices must be disposed of in accordance with the Waste Electrical and

Electronic Equipment Directive via the local collection points for waste electronic equipment.

Note on conformity

The CE mark is an over-the-counter mark that is addressed exclusively to the authorities and does not imply any assurance of

properties.

manual contains typographical defects or printing errors. We accept no liability for errors of a technical or printing nature and their consequences.

V1.1 (11/2023 – Device-Software: 2.6.3 / MCU 1.0.0)

Declaration of Conformity

Mi-Heat Heizsysteme GmbH hereby declares that the product M2 is in compliance with the RoHS Directive 2011/65/EU, the EMC Directive 2014/30/EU, the Low

Voltage Directive 2014/35/EU and the Radio Equipment Directive 2014/53/EU.

The detailed declaration of conformity can be found at: https://infrarot-fussboden.de/