klima SF300 Thermostat User Manual
3.Electrical installation Manual
3a. Attention:
Before installation or re-installation of the thermostat always isolate the power to
the thermostat. Installation needs to be done by a qualified electrician in accordance
with all current wiring and building regulations.
3b. Installer Instructions:
Check the power is off. Remove the display by gently using a slotted screwdriver in
the middle hole on the underside of the controller. The display should then click off
and allow you to remove it. Position the Back plate in line with the standard lighting
backing box and screw it in at the provided screw holes do this after wiring the
controller up.
ATTENTION: When the power is put on for the first time make sure that 5 minutes
is allowed for the backup battery to recharge first.
3c. Connection schedule
Terminal 1 = Power supply (Live)
Terminal 2 = Power supply (Neutral)
Terminal 3 = Heating cable wire 1*
Terminal 4 = Heating cable wire 2*
Terminal 5 = N/A
Terminal 6 & 7 = Floor sensor connection
*The Order heating wire 1 and 2 does not apply.
PLEASE NOTE = EARTH: Connect the Earth of the heating cable and the Earth of the
power supply outside the thermostat
3d. Technical Details
Power:
90-240Vac 60/60Hz
16A/250V
12k NTC 1%
5°C-35°C
0.5°C
Max. Load:
Floor sensor type:
Temp. range:
Accuracy:
Cover:
IP21
Warranty:
2 years
| General | Details |
|---|---|
| Name | klima SF300 Thermostat User Manual |
| Make | klima |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.15 MB |

Klima 825201 Intelligent Control Wi-Fi Underfloor Heating Thermostat User Manual

Klima 825200 Electric Underfloor Heating Thermostat User Manual

Klima C16 WiFi Floor Heating Thermostat User Guide

Klima H001 Smart Thermostat For Air Conditioner User Manual

Klima SF300 Digital Thermostat Instruction Manual



















