JUNG RTR230 230V Room Thermostat User Manual

1

2

3

4

Room thermostat (1-way NC contact) 230 V  

Room thermostat (1-way NC contact) 230 V  

Art. no.: RTR230  

Operating instructions  

1

Safety instructions  

Electrical devices may only be mounted and connected by electrically skilled persons.  

Serious injuries, fire or property damage possible. Please read and follow manual fully.  

Danger of electric shock. Always disconnect before carrying out work on the device or load. In  

so doing, take all the circuit breakers into account, which support dangerous voltages to the  

device and or load.  

This manual is an integral part of the product, and must remain with the end customer.  

2

Device components  

Figure 1: Device components  

(1) Room temperature controller insert  

(2) Frame  

(3) Central plate  

(4) Control knob  

(5) Internal temperature sensor  

(6) Adjustment rings temperature limit  

During renovation work, the temperature sensor (5) must not become dirty or be painted over.  

3

–

Intended use  

Electronic room temperature controller for controlling electrothermal valve drives for  

230 V~  

–

–

Control of the room temperature in closed rooms  

Mounting in appliance box with dimensions according to DIN 49073  

4

Product characteristics  

–

–

–

–

–

Manually setting a comfort temperature  

Internal temperature sensor  

Silent switching  

Controller output working method: pulse width modulation (PWM)  

Operates with valve type "deenergised closed"  

82404803  

J0082404803  

05.05.2022  

1 / 4  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	JUNG RTR230 230V Room Thermostat User Manual
Make	JUNG
Language	English
Filetype	PDF (Download)
File size	0.09 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• JUNG

JUNG RTR230 230V Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Room thermostat (1-way NC contact) 230 V Operating instructions Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully. Danger of electric shock. Always disconnect before carrying out work on the device or load. This manual is an integral part of the product, and must remain with the end customer. Device components Room temperature controller insert Internal temperature sensor Adjustment rings temperature limit Intended use Electronic room temperature controller for controlling electrothermal valve drives for 230 V.
• Page 2: Room thermostat (1-way NC contact) 230 V Valve protection function (once a week opening and closing of valve) Increasing or reducing the room temperature Turn the control knob to the right or left. In the middle position, the device regulates to approx. 20 °C setpoint temperature. The lowest setpoint temperature is approx. 5 °C and the highest setpoint temperature is approx. 30 °C. Recommended installation height: 1.50 m on interior walls. Do not mount the device near sources of interference, such as ovens, refrigerators, draughts or direct sunlight. Do not mount the device within shelf walls or behind curtains and similar covers. Do not use the device in multiple combinations with heat-generating devices such as dimmers. Mortal danger of electric shock. Disconnect the device. Cover up live parts.
• Page 3: Room thermostat (1-way NC contact) 230 V Connect electrothermal valve drive to insert according to connection diagram. Fit device in appliance box; terminals must be at the bottom. The unit calibrates itself within the first 90 minutes. Control deviations are possible during this period. The room temperature controller has a setting range of 5 ... 30 °C. The adjustment rings on the central plate can be used to limit the temperature setting range. Pull the control knob off the central plate so that the adjustment rings are visible. Turn the large blue adjustment ring clockwise to the desired minimum temperature. Turn the small red adjustment ring anticlockwise to the desired maximum temperature. Replace the control knob, observing the coding of the control knob and rotary axle.
• Page 4: Room thermostat (1-way NC contact) 230 V Technical data Rated voltage: AC 230 V ~ Mains frequency: 50 / 60 Hz Standby power: max. 0.5 W Connected load: 20 W Ambient temperature: -5 ... +45 °C Storage/transport temperature: -25 ... +70 °C Warranty: The warranty is provided in accordance with statutory requirements via the specialist trade.