Honeywell TH5220D1003 Heater Thermostat Owner’s Manual
Figure 2.1 - Buttons to Press to Enter Function
Programming Mode
Thermostat Function Program Selection
• To enter thermostat setup mode, press and hold the s and
FAN buttons until the display changes to setup mode. Use
the s and t buttons to change settings, the NEXT button
to advance to the next setting, and the DONE button to save
the settings and exit from the setup mode.
Press and hold to enter
function programming mode
• For gas fired unit heaters and duct furnaces (non-factory
supplied blower) with model numbers shown on the opposite
side, refer to Table 2.1 typical thermostat function settings.
• For all other system units (factory supplied blower), refer to
the job specific unit wiring diagram provided with the unit.
• For deviations to these wiring diagrams or the job specific
wiring diagrams, consult the factory.
• For additional information, refer to the vendor literature
supplied with the thermostat.
Table 2.1 - Typical Thermostat Function Program Settings ➀
Function
Number
Typical
Setting
Feature
Description
Single stage heat only with fan
2 heat/2 cool conventional (cooling by others)
2 heat/1 cool conventional (cooling by others)
Gas or oil furnace — equipment controls fan in heating
For gas or oil furnaces of less than 90% efficiency
For furnaces of over 90% efficiency
For gas or oil furnaces of less than 90% efficiency
For furnaces of over 90% efficiency
3
6
1
System type
7
3
5
Fan control
0
5
Heat cycle rate (CPH)
3
5
6
9-12
14
Second stage heat cycle rate (CPH)
Cooling functions
3
0
Fahrenheit
Temperature display
1
Celcius
15-26
27
Cooling and emergency heat functions
Heat temperature range stops
Cool temperature range stops
90
80
50
Default value, can be set 40-90 in increments of 1°F
For PTC models, this setting must be changed to 80
28
➀ See Honeywell instructions that shipped with stat for more information and additional setting options.
CommercialProductsGroup•ModineManufacturingCompany•1500DeKovenAvenue•Racine,Wisconsin53403-2552
"D"&"H"ModelSeriesandGasFiredUnitHeaters-Phone:1.800.828.4328(HEAT)•Fax:1.800.204.6011
"I"&"O"ModelSeries-Phone:1.866.823.1631(TollFree)•Fax:1.800.204.6011
© Modine Manufacturing Company 2009
Litho in USA
6-436.9
firealarmresources.com
| General | Details |
|---|---|
| Name | Honeywell TH5220D1003 Heater Thermostat Owner’s Manual |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.1 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH2300 Thermostat User Guide
EUROLAMP HY08BW Digital Heating Smart Thermostat User Manual
EUROSTER 2026TXRX Air Conditioning Thermostat Instruction Manual
Robertshaw RS9220 Digital Programmable Wall Thermostat Instruction Manual
GENERAL LIFE Senna 270 Digital Room Thermostat User Manual
PURGEAR STC-2303 Digital Thermostat User Guide
bryant Smart Thermostat User Guide
COMBUSTION CONTROL Anti Siphon Device Flue Gas Safety Thermostat Instruction Manual
Danfoss RET2001OT Digital Open Therm Room Thermostat User Guide
SALUS DT500 Thermostat User Guide
SIEMENS RDE100.1 Programmable Room Thermostat Instruction Manual