Home > Honeywell Home > Honeywell Home T10 Smart Home Thermostat Instructions
Honeywell Home T10 Smart Home Thermostat Instructions
Dry Contact Alerts on T10+ with EIM
ADDENDUM
Applies to the following Model Numbers:
YTHM1004R3000: Kit with T10+ Thermostat, EIM, Wireless Indoor Sensor, & Wired Discharge and
Return Sensors
YTHM1004R3001: Kit with T10+ Thermostat, EIM, Wireless Indoor Sensor, wireless outdoor sensor, &
Wired Discharge and Return Sensors
Dry Contact Alerts
A Dry Contact device such as a wet switch can be connected Water Leak Alert
to the S1, S2, S3, or S4 terminals at the Equipment Interface
When the dry contact device detects a water leak, the thermostat
Module. When the dry contact device detects a problem, the
alerts the user.
thermostat displays an alert on the home screen along with the
NOTE: When a water leak alert is selected, and the T10+ is
configured to control a humidifier there is a follow up
setting asking if you want to shut off the humidifier when
this alert is active or just send the alert message.
dealer information.
Notifications
System Shutdown
!
!
System Shutdown Alert
When the dry contact device detects a critical problem with
the system, the thermostat alerts the user that the system was
shut down. When the dry contact device detects a problem with
the system (for example, smoke detection), the thermostat will
not call for heating, cooling, fan or IAQ equipment until the dry
contact is deactivated or the feature is no longer configured at
the thermostat.
System Shutdown
A problem with the system was
detected and it has been shut
down. Contact your dealer for
service.
View Dealer Information
M39292
Service Needed Alert
When the user presses the alert for more information, the
notification screen is displayed, prompting them to contact
their dealer.
When the dry contact device detects an issue that requires
service, the thermostat provides an alert to the user.
Fan Failure Alert
The following dry contact alerts are available for the T10+
with EIM:
The Fan Failure Alert protects the equipment when there is no
airflow. When the dry contact device (for example, sail switch)
detects no airflow for 5 minutes after a call for forced air heat,
cool, or fan, the thermostat alerts the user that the system was
shut down due to a lack of airflow. The thermostat will call for the
fan and lock out all other equipment until the dry contact device
senses air flow again or the feature is no longer configured at
the thermostat.
Full Drain Pan Alert
When the dry contact device detects that the condensation
drain pan is full, the thermostat provides an alert to the user.
NOTE: When a full drain pan alert is selected, there is a follow
up setting asking if you want to shut off the system when
this alert is active or just send the alert message.
Custom Alert
Dirty Filter Alert
Allows the dealer to enter a custom alert to be displayed when a
dry contact device is activated. For example, a float switch can
detect when your sump pump is not working.
When the dry contact device detects a dirty air filter (pressure
drop across the filter), the thermostat alerts the user to replace
the filter.
Dry Contact Setup Example
Dry Contacts
6060
Dry Contacts
6065
Dry Contacts
6050
Dry Contacts
6000
i
i
i
i
Full Drain Pan Alert Dry Contact
Setup
Full Drain Pan Alert Dry Contact
Actions
What Terminals are Wired to the
Full Drain Pane Alert Dry Contact?
Select the Dry Contacts in the
System
None
Normally Open
Normally Closed
System Shut Down
Full Drain Pan Alert
Dirty Filter Alert
EIM S1
EIM S2
EIM S3
EIM S4
Water Leak Alert
System Shutdown Alert
Service Needed Alert
Done
Done
Done
Done
M39293
| General | Details |
|---|---|
| Name | Honeywell Home T10 Smart Home Thermostat Instructions |
| Make | Honeywell Home |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.14 MB |

Honeywell Home TH8320R1003-Uv VisionPRO 8000 with RedLINK Multistage Thermostat Installation Guide

Honeywell Home TH2110DH 1 Cool Programmable Digital Thermostat Installation Guide

Honeywell Home DT4R Wireless Room Thermostat User Guide

Honeywell Home N100 Series Non Programmable Thermostat User Guide

Honeywell Home X1N Non Programmable Thermostat Installation Guide

Honeywell Home DT4M Wired Room Thermostat User Manual

Honeywell Home T834 Series Thermostat Owner’s Manual

Honeywell Home M38794 T10 and T10 plus Pro Smart Thermostat with RedLINK Installation Guide

Honeywell Home DT4 Channel Wired Room Thermostat Instruction Manual

Honeywell Home FocusPRO Smart S200 Series Smart Thermostat User Guide






















