GENERAL LIFE HT100S RF Wireless Room Thermostat User Manual

1

2

BATTERY PLACEMENT  

RoomThermostatIndicator LED Descriptions  

ENGLISH  

If it blinks once  

Room Thermostat sends a close signal to the  

Receiver and the heating unit stops operating.  

Room Thermostat sends an open signal to  

the Receiver and the heating unit starts.  

DIGITAL ROOM THERMOSTAT  

If it blinks twice  

generallife.com.tr  

If it blinks three timesRoom Thermostat sends a pairing signal to  

the Receiver.  

RECEIVER  

HT100S RF USER MANUAL  

1-Manual Operation Button:  

By disabling the Receiver, it enables you  

1

GENERAL SPECIFICATIONS  

DIGITAL ROOM THERMOSTAT  

to use your boiler manually.  

2-Pairing Button:  

2

HT100S RF is a wireless room thermostat. The user can adjust the  

room temperature with the required temperature and get more  

comfortable and economic heating.  

3

Allows to pair the Receiver with the  

Room Thermostat.  

3-Receiver LED Light  

4-Receiver Power Cable Input  

5-Boiler Connection Cable Input  

As shown in the picture above, press the screwdriver forward from the  

space shown, bend the tabs and separate the front cover. Insert 2 new  

AAA alkaline batteries in the battery housing with the correct battery  

direction. Replace both batteries at the same time. Then align the front  

part of your Room Thermostat to the back and squeeze it towards the  

back.  

 PreciseTemperatureMeasurement  

WirelessConnection  

TPIAlgorithm  

 ON/OFFControl  

HT100S RF  

USER MANUAL  

HT100S RF AND EQUIPMENTS  

HT100S RF  

Room Thermostat  

Alkaline  

Battery  

Holder  

WARNING!  

4

5

When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be  

out of warranty.  

RECEIVER LED DESCRIPTIONS  

Pleasethrow yourdead batteriesinto thewastebin for batteries.  

Steady Red  

Receiver has power but Receiver and  

Room Thermostat are not paired.  

RECEIVER PLACEMENT  

Blinking Green  

Steady Green  

Waiting for pairing signal from Room Thermostat.  

Dowels and Screws  

Receiver  

The important things to note for the Receiver  

placement is avoiding physical contact  

between the Receiver and boiler, and  

protecting it against materials such as  

liquid,dust etc.  

Receiver and Room Thermostat are paired.  

Boiler is not operating.  

3 Short Orange  

Blinking  

Operate the boiler signal has reached to the  

Receiver.  

Steady Orange  

Boiler is operating.  

TECHNICAL DATA  

Room Thermostat  

3 Short Green  

Blinking  

Shut the boiler down signal has reached to the  

Receiver.  

The devices should be placed in order to minimize the damage to the  

received and transmitted signals by paying attention to the following  

points;  

Dimensions ( H / L / W )  

Operating Current  

85mm / 125mm / 24mm  

Blinking Orange  

Boiler is operating in manual mode.  

3V DC (2 x AAA alkaline battery)  

0.1^oC  

Temperature Measurement  

Accuracy  





The devicesshould not be mounted on metalsurfaces.  

The devices should not be installed close to electrical cables and  

electronic equipment such ascomputers and televisionunits.  

The devices should not be installed near large metal structures or  

other building materials using fine metal meshes such as special  

glass or specialconcrete.  

Blinking Red  

Receiver did not get a signal from the  

Room Thermostat for 22 minutes or longer and  

boiler has shut down.  

Operating Temperature Range  

Battery Life  

(5^oC) – (35^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  



ROOM THERMOSTAT PLACEMENT  

Operating Temperature  

Storage Temperature  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room or  

side of window should be avoided. Also anywhere close to heating units  

such as radiator, stove and spots which get direct sun lights would not  

be suitable. Room Thermostat needs to be located above the floor  

150cmheight. Fewtrialsmaybe made to find themost convenientspot.  





Distance between the Room Thermostat and the Receiver should not  

exceed20metersor 2 floors.  

Receiver  

Receivermust be installedatleast50cmawayfrom theboiler.  

Dimensions  

90mm / 90mm / 25mm  

230V AC  

RECEIVER SETUP  

Operation Current  

Relay NO Switching Current  



First, shut down your boiler and your boiler's power source with all  

electricalcurrent(fuse,socketetc.)  

7A (240VAC – Resistive load)  

10A (120VAC – Resistive load)  

(-20^oC) – (+60^oC)  



As shown in the connection diagram, connect one end of the boiler  

connection cable to the COM and the other to the NO input.of the  

Receiver.  

Storage Temperature  

min.20 cm  

ROOM THERMOSTAT  



Connect the other ends of the cable -which you connected to the  

Receiver- to room thermostat connection terminal as shown in your  

boiler's usermanual.  







You must first connect the Receiver power cable to the Receiver and  

then to thefuse to which theboiler is connected.  

Indicator LED  

After completing the cable connection process,firstly turn on your  

fuse and then yourboiler.  

Adjustment Knob  

By pressing the Receiver's manual usage button for 2 seconds, you  

should see the Orange Light blinking on the Receiver. In this way, after  

making sure that the boiler is operating, press the same button again  

for 2 seconds and seethattheOrangeLEDturns off.  

Set up the Room Thermostat to pair the Receiver with the Room  

Thermostat.  



generallife.com.tr  

1

2

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE HT100S RF Wireless Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.21 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE HT100S RF Wireless Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Battery placement is important for the room thermostat. The room thermostat sends signals to the receiver to control the heating unit. If the thermostat blinks once, it indicates the heating unit stops operating. A blink twice indicates the heating unit starts operating. A blink three times sends a pairing signal to the receiver. The HT100S RF is a wireless room thermostat for comfortable and economic heating. Receiver placement should avoid physical contact with the boiler and protect against dust and liquids. The room thermostat should be placed in frequently used rooms, avoiding areas with direct sunlight or near heating units. The distance between the room thermostat and receiver should not exceed 20 meters. Receiver setup requires shutting down the boiler and connecting the receiver correctly to ensure proper operation.
• Page 2: Warranty conditions state that the warranty period starts from the invoice date and lasts for 5 years against manufacturing defects. The receiver wiring diagram indicates that the room thermostat sends a status signal to the receiver every 10 minutes. If the signal is not received for 22 minutes, the receiver stops the boiler operation for safety reasons. Devices are delivered in working condition, and on-site commissioning is subject to a service fee. Repairs covered by the warranty are conducted at the company factory, and transportation costs are the customer's responsibility. Maintenance of devices is also done by the company, with travel fares covered by the customer. Malfunctions caused by customer misuse are not covered by the warranty. The TPI room thermostat has a learning process that restarts if its placement is changed or if it is de-energized. TPI technology ensures energy efficiency by predicting temperature changes and adjusting the heating unit accordingly. The warranty document must be retained by the customer, and a replacement will not be issued if lost.