Home > Evolveo > EVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual

EVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual

INSTALLING A THERMOSTAT ON THE TABLE  
1. Carefully separate the front of the thermostat from the back plate by inserting a  
small flathead screwdriver into the grooves on the bottom of the thermostat  
2. Attach the front of the thermostat to the table stand provided.  
INSTALLATION OF THE RECEIVER ON THE WALL  
1. Using a small screwdriver, slightly loosen the screw located on the base of the  
RF switch. You can then carefully separate the front panel from the back panel.  
2. Place the back plate of the RF-receiver on the wall and fix it with the screws  
provided.  
3. Connect the cables to the RF receiver according to the wiring diagram.  
4. Mount the front panel on the back plate and tighten the fixing screw.  
5. Turn on the power - the power light will come on.  
43  
GeneralDetails
NameEVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual
MakeEvolveo
LanguageEnglish
FiletypePDF (Download)
File size1.59 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

EVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual