Home > Evolveo > EVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual

EVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual

- Select Wi-Fi and enter your password  
- Wait for the device to successfully add  
Wi-Fi connection method  
- Press the "+" button in the top right corner to add a device  
- Go to "Small Home Appliances" and select "Thermostat (BLE+Wi-Fi)" from the  
list.  
- Select the 2.4Ghz Wi-Fi network, enter the password and press the "Next"  
button  
- Long press the pairing button on the receiver to enter connection mode, the  
LED will flash rapidly  
- Press the "Next" button in the app, check the "LED flashes fast" box on your  
phone and add the device  
- Wait for a while until the connection is complete. The LED on the receiver stops  
flashing. Connection to WiFi was successful  
If the LED still flashes slowly, the connection has failed, try again from step 5  
Remark: If the device is connected and remains online when you want to make a  
new connection, remove the device from the app or clear all pairings on the  
receiver.  
PARAMETER SETTINGS  
Turn off the thermostat, press and hold the M button and the  
button for 6  
seconds to enter the parameter settings. Press the M button each time to move to  
the next item setting. Set the value by pressing  
or  
.
Offer  
Description  
Scope  
Default  
value  
0℃  
01  
Temperature  
-8 - 8 ℃  
calibration of the  
internal sensor  
Set point Max.  
02  
03  
05  
5 - 35 ℃  
35 ℃  
5 ℃  
Set Point Min.  
5 - 35 ℃  
Frost protection  
settings  
Disable: ×  
5 ℃  
Allow: 5 - 15 ℃  
40  
GeneralDetails
NameEVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual
MakeEvolveo
LanguageEnglish
FiletypePDF (Download)
File size1.59 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

EVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual