EPH CDTP2 Room Thermostat Installation Guide
1) Remove the thermostat from its packaging.
2) Choose a mounting location so that the thermostat can
measure the room temperature as accurately as possible.
-
-
Mount the thermostat 1.5 metres above the floor level.
Prevent direct exposure to sunlight or other heating /
cooling sources.
3) Use a philips screwdriver to loosen the screw on the bottom
of the thermostat. The thermostat is hinged and can be
opened 90 degrees.
4) Wire the thermostat according to the diagram on page 7.
5) Screw the backplate onto a back box or directly to the surface.
6) Close the front housing and tighten the fastening screw on
the bottom of the thermostat.
EPH Controls Ltd.
9
| General | Details |
|---|---|
| Name | EPH CDTP2 Room Thermostat Installation Guide |
| Make | EPH |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.58 MB |
(1 votes, average: 5.00 out of 5)
Loading...
STELPRO SAT402ZB Smart Thermostat User Guide
KETOTEK KTF0163 Series Smart Thermostat Instruction Manual
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
Agatige MH1823 Intelligent Thermostat User Guide
EPH CONTROLS eTRV Smart Radiator Thermostat Instruction Manual
Roth Touchline SL Plus Room Thermostat Instruction Manual
Honeywell TH8732WFH5004 Round Smart Thermostat User Guide
GENERALLIFE MITRA 230S RF Wireless Room Thermostat User Manual
Danfoss VIMCB20F Icon2 / 24V On Wall Mount Room Thermostat Installation Guide
HITACHI ATW-RTU-11 Compact Wired Thermostat User Manual