Home > ENGO > ENGO E901 Programmable Wired Thermostat User Manual

ENGO E901 Programmable Wired Thermostat User Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

6.2 AUTO mode - schedule type 1

- AUTO Mode - In the automatic mode, the thermostat maintains the set temperature according to the schedule selected by the user. You can

choose from 2 types of schedule to manage the temperature during the week.

Comfort and Economic temperature setpoints works not only in manual mode but also for the ﬁrst type schedule mode.

First type schedule mode is represented by timeline - 24 hours of a day. Empty„boxes”means hours where Economic (Moon) setpoint temperature will be

maintained, black„boxes”means hours where Comfort (Sun) setpoint temperature will be maintained.

6.2.1 Default program settings (1-3)

Within ﬁrst type schedule mode there are 9 programs available. Programs 0 to 3 are factory-deﬁned programs that cannot be changed. In this chapter you

will ﬁnd detailed information on the built-in factory programs (1-3) in the E901. These are pre-programmed time settings for the comfort and economy

temperature that can be assigned to a selected day. To set up the program, see the steps below. The black squares on the timeline (see the list of factory

programs below) indicate the operating time for the comfort temperature mode, while the absence of them - for the economy temperature mode. Under

the chart of each program, there is time (hour) when each mode is active. By default, program 1 is set for each day of the week.

Press any button to highlight the display.

Press

button to enter the programming mode.

PROG

Select the week period using or buttons.

Conﬁrm by button.

Using or buttons choose program number (0-3).

Conﬁrm by button. The thermostat will proceed to

program selection for the next time period.

At the bottom of the display you can see the time line, i.e.