Home > ENGO CONTROLS > ENGO CONTROLS E10-B Wi-Fi Thermostat User Guide
ENGO CONTROLS E10-B Wi-Fi Thermostat User Guide
Installation of the Wi-Fi thermostat in the app
7
8
STEP 3 - CONNECT THE THERMOSTAT TO WI-FI
Make sure your router is within range of your smartphone. Make sure you are
connected to the Internet. This will reduce the pairing time of the device.
After installing the app and creating an account:
1
2
STEP 1 - DOWNLOAD ENGO SMART APP
Download the ENGO Smart app from Google Play or Apple App Store and install
it on your smartphone.
Go„DONE”.
The thermostat has been installed and
displays the main interface.
3 sec.
3 sec.
Make sure the thermostat is
On your mobile device,
How to fix the problem?
powered on. Then press and hold
the buttons on the thermostat for
approx. 3 seconds until the display
shows„PA”. Then release the keys.
The pairing mode will be started up.
make sure the ENGO Smart has
access to permissions (Location,
Bluetooth, Nearby devices).
Then turn on Bluetooth and
Location. Connect to 2.4GHz
Wi-Fi network to which you
want to assign the device.
STEP 2 - REGISTER THE NEW ACCOUNT
DESCRIPTION
TROUBLESHOOTING
The thermostat is not connected to the Internet. Check the
connection between thermostat and Internet. In this case, it is
possible to control the thermostat locally using a mobile device.
The mobile device and the thermostat must be on the same Wi-Fi
network.
The internet
To register a new account, please follow the steps below:
connection icon is
not displayed on
the thermostat.
1
2
4
3
1. The Wi-Fi network in which the thermostat was installed is
turned off. Check the router and Wi-Fi connection. In this case,
it is possible to control the thermostat locally via Bluetooth. The
mobile device must have access to the Internet (via Wi-Fi or mobile
data) and be near the thermostat.
The Wi-Fi
connection icon
is flashing on the
thermostat.
2. The thermostat is in pairing mode. Reinstall the thermostat.
Check or connect the external temperature sensor.
Thermostat
Click„Sign Up”to create
new account.
Enter your e-mail address
to which the verification
code will be sent.
displays error E2.
The thermostat Check if you connected the wires correctly or if the thermostat is
has the display off. not turned off in the app.
In the app, select:
„Add Device”.
After finding the
thermostat, go„Add”.
3
4
6
5
Restore default settings
Wi-Fi 2,4GHz
*****
To restore the default settings of the
thermostat, hold down the
&
buttons for approx. 8 seconds. „FA” monit
will be displayed. After all, the thermostat
will go through a default reset sequence and
display the main screen.
Select the Wi-Fi network in which
the thermostat will operate and enter
the password of this network.
Wait for the app to configure
the thermostat with the selected
Wi-Fi network.
Enter the verification code received in
the email. Remember that you only
have 60 seconds to enter the code!
Then set the login password.
8 sec.
8 sec.
| General | Details |
|---|---|
| Name | ENGO CONTROLS E10-B Wi-Fi Thermostat User Guide |
| Make | ENGO CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.19 MB |

ENGO Controls EONE230W Internet Controlled Thermostat User Guide

ENGO CONTROLS FAN-24W 24V Fan Coil Thermostat User Guide

ENGO CONTROLS EFAN-230W Fan Coil Thermostat User Guide

ENGO CONTROLS EASY230W Non-Programmable Wired Thermostat User Guide

ENGO CONTROLS EONE230 Internet Controlled Thermostat User Guide

ENGO CONTROLS EONEBATW, EONEBATB Internet Controlled Thermostat User Manual

ENGO Controls E901WIFI Internet Wireless Thermostat User Guide

ENGO CONTROLS EONE-BATW, EONE-BATB Internet Controlled Thermostat User Guide

ENGO CONTROLS EFAN-24W Fan Coil Thermostat User Guide

ENGO CONTROLS EFAN-230W WIFI 230V Fan Coil Thermostat User Guide














