Home > ELEKTROBOCK > ELEKTROBOCK PT02 Electronic Pipe Thermostat Instruction Manual
ELEKTROBOCK PT02 Electronic Pipe Thermostat Instruction Manual
DOIDE INDICATION
RED diode
RE
LIT = RELAY indication
ORANGE diode
ERR
BLINKING = sensing sensor error
GREEN diode
PWR
LIT = power indication
SETTINGS
C
After thermostat instalation, to access the adjusting elements, remove the screw
and lift the transparent cover of the controls. It is then possible to set the controls.
Turn the control knob
to the desired position:
1
a) ON - the thermostat is still closed regardless of temperature,
b) OFF - the thermostat is always switched off regardless of temperature,
c) position 30 °C to 80 °C - the thermostat switches on the output when the set
temperature is exceeded and switches off when the temperature fall by set
hysteresis with
.
2
Anti-scale protection - if the pump is inactive for more than 24 hours, it will be
switched on for about 15 seconds.
Technical parameters
Power supply
230 V / 50Hz
< 1W
hysteresis ( 2 °C až 20 °C)
+30 °C až +80 °C
0 °C až +40 °C
IP20
Power consumption
Type of regulation
Range of regulation
Ambient temperature
Degree of protection
Protection class
Output type
II
relay (potential-free contacts)
10 A/ 250 V AC
130x44x35
Max. load (resistive)
Dimension
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
In case of warranty or post-warrant service, send the
product to the manufacturer’s address together with a
copy of the purchase receipt.
Kuřim 664 34
CZ
MADE IN CZECH REPUBLIC
Tel./fax: +420 541 230 216
Technická podpora (do 14h)
Mobil: +420 724 001 633
+420 725 027 685
Pb
LEAD FREE
v
souladu
s
RoHS
9
| General | Details |
|---|---|
| Name | ELEKTROBOCK PT02 Electronic Pipe Thermostat Instruction Manual |
| Make | ELEKTROBOCK |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.18 MB |


























