Home > ECSPST > ECSPST Fort Programmable Thermostat User Guide

ECSPST Fort Programmable Thermostat User Guide

Installation Plan B  
Our products are designed to comply with the recommended codes of practice and to be installed and serviced by competent  
persons in accordance with the relevant wiring regulations.  
!
Warning: Before any installation or maintenance, ensure that the electrical supply is switched off at the breaker.  
When installing the Thermostat directly to the boiler, ensure the receiver is within the WiFi coverage area.  
Thermostat’s  
position  
Receiver’s  
position  
Boiler  
Note: Distance between thermostat and receiver cannot be greater than 100m (open field).  
When the Thermostat is connected directly to the boiler, item 8 of the configuration should be “ON” .[Page 5].  
As default it is set to OFF  
1
Install receiver as gateway with plug adapter  
The icon “  
” aligned with the button as  
shown, and then press down on the button  
1
2
4
Install rear bulkhead  
Press and rotate to clip in the adapter  
Complete  
2
Installation Plan B Wiring  
Black & Grey  
Control  
Cables  
Potential Free Relay  
1
If NC is required,  
terminate into  
COM & NC  
TH TH  
N/C COM  
N/O  
Remove the buckle with a flat  
headed screwdriver  
1
2
Boiler  
Take off safety cover  
Black & Grey  
Control  
Cables  
230V Relay  
2
Clip  
Caution:  
potential of 230V  
on connection.  
Risk of electric  
shock  
LS LR  
N/C COM  
N/O  
Boiler  
3
4
Wire into connections  
Reinstall safety cover  
Page: 8  
GeneralDetails
NameECSPST Fort Programmable Thermostat User Guide
MakeECSPST
LanguageEnglish
FiletypePDF (Download)
File size1.32 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

ECSPST Fort Programmable Thermostat User Guide