Danfoss TP5001B Programmable Room Thermostat User Guide

1

Display & Navigations  

Symbols  

Function description  

Symbols Function description  

Mon – Sun Current set day  

Schedule mode  

1

2

3

4

Current on/off period  

Holiday mode  

Current set time /  

parameter number in  

setup  

RF Status  

(TP5001RF only)  

AM  

PM  

Easy User Guide  

Battery low indicator  

(TP5001B & TP5001RF only)  

Room temperature  

TP5001  

Programmable Room Thermostat  

Temperature indication  

Power on/off  

Timer and program  

operation  

Set temperature  

SET  

Mode change / option  

setting  

Heating active  

M

BC337370422703en-000102 | 087R1003  

www.danfoss.com  

Temperature / option  

setting selectors  

Frost protect active  

Setting/Changing the Temperature  

What is a programmable room thermostat?  

a. Press or at any time to change the desired temperature value. SET is shown  

in the display.  

A programmable thermostat allows you to set times at which you want you  

heating to be at a specific temperature. A room thermostat works by sensing the  

air temperature and switching on the heating when the air temperature falls below  

the thermostat setting, switching it off once this set temperature has been reached.  

The TP5001 programmable room thermostat has made intelligent heating control  

easier than ever before.  

b. When releasing the or , after around 5 seconds, the display returns to  

showing the actual temperature. This temperature change is only temporary and  

will be maintained only until the next programmed setting.  

Holiday Mode  

Setting Time and Date  

Holiday Mode selects the comfort temperature typically when the home is  

unoccupied  

a. Press button , the screen will change to show the current year.  

b. Adjust using or to set the correct year. Press to accept. Repeat step b to set  

month and time settings.  

a.Press M to enter into Holiday mode and will be displayed.  

b. Holiday mode temperature can be set in User settings, 07.  

c. Press M again to exit Holiday mode.  

Advanced Programmable Timer  

The Advanced Programmable Timer mode enables the setting of a timer-controlled  

program for automatic comfort temperature, and an energy-saving lower setback  

temperature if standard room comfort temperature is not required.  

Example below for 5/2 day setup, 4 Temperature settings  

The function consists of 2 programs:  

Frost Protection Temperature  

a. The thermostat is turned OFF (Standby) mode by pressing . In OFF (Standby)  

mode the thermostat is set to Frost Protect temperature setting and will switch  

the output On if the measured temperature falls below the frost protection  

temperature setting.  

P1 with 4 events over weekdays (Mon. To. Fri.)  

P2 with 4 events over weekends (Sat. Sun.).  

b. Frost protect icon and current temperature will be display.  

P2: Sa. Su. are now shown in the display.  

P1: Press once to activate product.  

The press for 3 seconds to display  

Mo. Tu. We. Th. Fr.  

User Settings  

a. Press M button once to illuminate screen, next press M for 6 seconds to enter the  

User setting mode. Press M for parameter selection and set the parameter range  

via or . Complete all adjustments.  

P2, Event 1:  

P1, Event 1:  

1. Use or to select the start hour.  

2. Press to accept the setting.  

3. Use or to set the minute.  

4. Press to accept the setting.  

5. Use or to select the temperature.  

6. Press to accept the setting.  

1. Use or to select the start hour  

2. Press to accept the setting.  

3. Use or to set the minute.  

4. Press to accept the setting.  

5. Use or to select the temperature.  

6. Press to accept the setting.  

b. To exit press , automatic exit after 20 seconds when no button is pressed.  

No.  

Parameter settings  

Settings range  

01: Manual  

Default  

01  

Working mode  

02: Schedule timer 5/2 day  

03: Schedule timer 24hr  

02  

P1, Event 2–4:  

Repeat the Event 1 procedure  

for programming Events 2–4.  

P2, Event 2–4:  

Repeat the Event 1 procedure  

for programming Event 2–4.  

01: On/off load compensation  

02: On/off standard  

02  

03  

Heat control mode  

01  

01  

01: Normal start control  

02: Delayed start control  

03: Optimised start control  

Heat control start-up  

mode  

If the working mode is set to 24hr, only P1 program will be available (same times  

each day of the week), to change this see the User settings section of this document.  

04  

05  

06  

07  

Temperature limit high  

Temperature limit low  

Frost protect temperature  

Between low (05) and 35° C  

Between 5° C and high (04)  

Between 5° C and 15° C  

35° C  

5° C  

Display and Navigation Details  

5° C  

Holiday mode temperature Between low (05) and high (04)  

18° C  

01: 24hr  

08  

09  

10  

Timer display  

02: 12hr  

24hr  

Service due setup  

Installer setting only  

00: RF pairing mode off  

01: RF pairing mode on  

RF Pairing (TP5001RF only)  

00  

01  

01: On  

02: Off  

11  

Auto daylight saving  

Danfoss A/S  

Heating Segment • danfoss.com • +45 7488 2222 • E-mail: heating@danfoss.com  

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed ma-  

terial. Danfoss reserves the right to alter its products without notice. This also applies to products already  

on order provided that such alterations can be made without subsequential changes being necessary in  

specifications already agreed.  

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logo-  

type are trademarks of Danfoss A/S. All rights reserved.  

087R1003  

© Danfoss | FEC | 09.2020  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Danfoss TP5001B Programmable Room Thermostat User Guide
Make	Danfoss
Language	English
Filetype	PDF (Download)
File size	0.35 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Danfoss

Danfoss TP5001B Programmable Room Thermostat User Guide Overview

Summary of Contents

• Page 1: Display & Navigations Symbols Function description Current set day Schedule mode Current on/off period Holiday mode Current set time / parameter number in setup What is a programmable room thermostat? Holiday Mode selects the comfort temperature typically when the home is unoccupied The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic comfort temperature.