Home > BVF Heating > BVF Heating L-1 Smart Outdoor Thermostat User Manual
BVF Heating L-1 Smart Outdoor Thermostat User Manual
User manual
AUTO MODE
You can see below the conditions when the thermostat will start heating. For this feature you need to enable auto mode in the app.
•
•
•
•
•
•
Heavy snow
Blizzard
Light to moderate snow
Light snow shower
Moderate snow
Snow shower
•
•
•
•
•
•
Temperature <1 °C, and humidity >70% (both two condition required)
Light snow
Snow
Freezing fog
Sleet
Fog
NOTIFICATION MODE
The application sends notification if the weather conditions justify starting the heating.
PROGRAM MODE
In the application you can set heating schedule for every day of the week.
MANUAL OR OFFLINE MODE
If you don’t want to use your phone to change mode on the thermostat you can do it manually with the touch button. For each touch the
thermostat switches to the next mode cyclically.
Heating off
Heating on
Heating on for 1 Hour
Heating on for 2 Hours
Heating on for 3 Hours
Heating on for 4 Hours
INSTALLATION & WIRING DIAGRAM
The thermostat is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.
ATTENTION!
The thermostat can be placed indoors only!
1. Using a small screwdriver, slightly loosen the screw
from the bottom face of the thermostat. Then carefully
separate the front half from the back plate.
2. Place the thermostat front somewhere safe.
3. Terminate the thermostat as shown in the diagram.
4. Screw the thermostat back plate securely into the back
box.
5. Clip the front of the thermostat onto the back plate.
TROUBLESHOOTING
Please scan the QR code for troubleshooting information
v1.0 EN (13.07.2022)
bvfheating.com
| General | Details |
|---|---|
| Name | BVF Heating L-1 Smart Outdoor Thermostat User Manual |
| Make | BVF Heating |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.22 MB |














