Home > WhisperKOOL > WhisperKOOL Phantom 24V Thermostat Conversion Kit Installation Guide
×
- 1. Phantom (V Thermostat → Conversion Kit → Installation Manual → V Thermostat Conversion Kit To Be Used In Conjunction With Phantom 3500/5000/8000)
- 2. Conforms To Ansi/ul Std 427 (Copyright 2018. Whisperkool. All Rights Reserved. → Whisperkool Copyrights This Manual, The Product Design, And The Design Concepts, With All Rights Reserved. → Every Effort Has Been Made To Ensure That The Information In This Manual Is Accurate. → Whisperkool Reserves The Right To Make Corrections Or Improvements To The Information Provided And To The Related Hardware At Any Time, Without Notice. → Vinothèque And Whisperkool Are Registered Trademarks, And Ece Is A Trademark Of Whisperkool. All Rights Reserved. → Mention Of Third-party Products Is For Informational Purposes Only And Constitutes Neither An Endorsement Nor A Recommendation.)
- 3. Receiving & Inspecting The Kit (Before You Start → V Thermostat Conversion Kit → Installation Instructions)
- 4. Introduction (Customer Service → Using The Manual → What Is A 24v Thermostat Conversion Kit? → How Does The 24v Thermostat Conversion Kit Work?)
- 5. Upon Receiving Your 24v Thermostat Conversion Kit (Review The Packing Slip To Verify Contents → Check The Model Number To Ensure It Is Correct → Contact Whisperkool Customer Service Immediately → Remember → Evaporator Unit Components Provided: Tools Needed)
- 6. Before You Start
- 7. V Thermostat Conversion Kit Installation Instructions
- 8. Pull The Enclosure From The Unit Forward And Remove Lid Using Phillips Screwdriver.
- 9. Disconnecting The 4 Pin Molex Connector (Removing The Original Controller Enclosure → Positioning Or Removing Remaining Wires → Locating The 24v Conversion Kit → Mounting The Conversion Kit → Locating The Lever Connector)
- 10. Route The Black Wire Into The New Enclosure (Insert The Black Wire Into The Lever Connector → Re-install The Box Cover → Connect The 4 Pin Molex Connector)
- 11. Install The New 24v Kit Enclosure (Route Thermostat Wire → Strip Thermostat Wire → Drill A Hole In The Access Panel)
- 12. Insert Provided Grommet Into Hole. (Connect Thermostat Wires With The Provided Wire Nuts By Color Matching Red To Red, Blue To Blue, Green To Green And Yellow To Yellow. → Install The Evaporator Access Panel Onto The Unit. → The Conversion Is Now Complete. → The 24v Thermostat Conversion Kit Has Been Successfully Installed.)
- 13. Whisperkool (E. Alpine Ave → Stockton, Ca 95205 → 800-343-9463 → Www.whisperkool.com → Vtck.phantom)
×
WhisperKOOL Phantom 24V Thermostat Conversion Kit Installation Guide
WhisperKOOL
1738 E. Alpine Ave
Stockton, CA 95205
1-800-343-9463
24VTCK.Phantom 091720
| General | Details |
|---|---|
| Name | WhisperKOOL Phantom 24V Thermostat Conversion Kit Installation Guide |
| Make | WhisperKOOL |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.24 MB |


CLIMATE MASTER CXM2 Communicating Awc Thermostat Installation Guide

GLOBAL WiFi Heating Thermostat User Manual

TRANE SC360 Link System Controller and Smart Thermostat Instructions

SOGEDIS 1001 MODEL UP Refrigerator Thermostat Instruction Manual

namron 4512737 Touch Zigbee 16A Thermostat Instruction Manual

HERSCHEL iQ T2 Wireless Thermostat Instruction Manual

Comfortmaker ION Gray Smart Thermostat Instruction Manual

EMERSON 1D56-310 White-Rodgers Low Voltage Horizontal Mounting Thermostat Instruction Manual

ENGO CONTROLS E10-MBUSW Wi-Fi Modbus Thermostat User Guide

DEVIreg Electronic Intelligent Timer Thermostat Installation Guide
Table of Contents
- 1. Phantom - V Thermostat →
- 2. Conforms To Ansi/ul Std 427 - Copyright 2018. Whisperkool. A... →
- 3. Receiving & Inspecting The Kit - Before You Start →
- 4. Introduction - Customer Service →
- 5. Upon Receiving Your 24v Thermostat Conversion Kit - Review T... →
- 6. Before You Start →
- 7. V Thermostat Conversion Kit Installation Instructions →
- 8. Pull The Enclosure From The Unit Forward And Remove Lid Usin... →
- 9. Disconnecting The 4 Pin Molex Connector - Removing The Origi... →
- 10. Route The Black Wire Into The New Enclosure - Insert The Bla... →
- 11. Install The New 24v Kit Enclosure - Route Thermostat Wire →
- 12. Insert Provided Grommet Into Hole. - Connect Thermostat Wire... →
- 13. Whisperkool - E. Alpine Ave →















