Home > URC Support > URC Support TIDE DIAL Smart Thermostat User Guide
URC Support TIDE DIAL Smart Thermostat User Guide
6. Selecting System Mode
Current system mode (Auto, Cool, Heat, Off)*1 is displayed on the thermostat home screen. To switch
available mode either press Mode Menu Short Cut Key then rotate dial or press dial to expose menu,
navigate through menu by rotating dial clockwise/counter-clockwise, press mode menu to expose
drop down menu and then press dial to select desired mode. After valid selection, it exits menu and
presents selected mode icon on home screen
*1: System mode can be varied depending on HVAC system type configuration.
Mode Menu Short Cut Key
Press to open drop down menu from
anywhere and press again to close drop down
menu
Rotate Dial to navigate through menu
and Press to Select
Press to expose menu from home screen or
make a selection
Auto: Heating or cooling will be serviced at
your desired temperature. The system will
automatically switch between heating and
cooling mode as needed to maintain desired
temperature
Caution! Emergency Heat should
only be used for emergencies
until the HVAC system is repaired.
Running the system in Emergency
Heat mode is often the most
expensive mode since only the
electric heat strips are being used
instead of the more efficient heat
pump compressor
Cool: Only cooling will be serviced at your
desired temperature
Heat: Only heating will be serviced at your
desired temperature
Emergency Heat: Additional system mode
only available for heat pump system
Off: System is off, no heating nor cooling will
be serviced. If system was on, it will take some
time to turn off
20
Copyright © Universal Electronics
| General | Details |
|---|---|
| Name | URC Support TIDE DIAL Smart Thermostat User Guide |
| Make | URC Support |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.99 MB |






































