Home > ROMA HEATING > ROMA HEATING CT1000 WiFi Colour Touch Screen Thermostat User Manual
ROMA HEATING CT1000 WiFi Colour Touch Screen Thermostat User Manual
Settings Page 2, NTC Select.
This setting alows the user to select
between air, floor or a combination
of air & floor sensors.
I = Internal Air Sensor Temp.
E = External Floor Probe Temp.
I&E = The thermostat will only regualte air temp but will show all 3
temperatures. If however the floor temp exceeds the high or low
temperature protection settings the heating will turn off or on
until the floor temperature no longer exceed these settings. During
this time a Yellow warning triangle will appear on screen.
IorE = Only floor temperature will be regulated and shown along with
set temp. If however the air temp drops below the Low Protection
setting then the heating will turn on.
Setting Page 3: EL Units Only.
Settings Page 4, Backlighting.
Backlight Time. This is the time
the screen is fully illuminated before
turning down in brightness.
Backlight Min.is the % of maximum
brightness the screen will show
when not in use. Backlight Max is the % of maximum brightness
the screen will show when in use. Backlight On/Off. Backlight can
be set to full off when screen is not in use. NOTE: A low backlight
or full off is best for bedrooms.
| General | Details |
|---|---|
| Name | ROMA HEATING CT1000 WiFi Colour Touch Screen Thermostat User Manual |
| Make | ROMA HEATING |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.36 MB |

ROMA HEATING RWI5 Wi5 Wi-Fi Digital Heating Thermostat User Manual

ROMA HEATING RT5 Touch Screen Thermostat Instructions



























