PROSELECT PSTSN11AWH Non Programmable Thermostat Installation Guide
Base plate mounting system installation
1. Before starting, turn the power
1
2
off at the breaker box or switch.
Open package to find the base
plate. See Figure 1.
2. Position the base plate on
the wall. Level and mark hole
positions. See Figure 2.
Drill holes at marked positions,
and then lightly tap supplied
wall anchors into the wall using
a hammer.
3
4
‒ Drill 3/16” holes.
3. Pull the door open and insert
the wires through wiring hole of
the base plate. See Figure 3.
4. Place the base plate over the
wall anchors. Insert and tighten
the supplied mounting screws.
Do not overtighten.Tighten until
the base plate no longer moves.
Close the door. See Figure 4.
M38850
Use 3x supplied
screws (#6 1-1/2)
2
| General | Details |
|---|---|
| Name | PROSELECT PSTSN11AWH Non Programmable Thermostat Installation Guide |
| Make | PROSELECT |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.37 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
SIEMENS RDZ100ZB Zigbee Room Thermostat Owner’s Manual
ENGO E55W230WIFI Wi-Fi Thermostat User Guide
Marley TA1A Single Pole Thermostat Instruction Manual
Roth Touchline SL Standard Room Thermostat Installation Guide
hansgrohe AXOR STARCK X Concealed Thermostat with Shut Off Valve Instruction Manual
Honeywell Home T6 Pro Smart Programmable Thermostat User Guide
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
EPH CONTROLS TM-S Room Thermostat Instruction Manual
olympia electronics BS-830 Digital Electronic Thermostat Instruction Manual