Home > PROSELECT > PROSELECT PSTSN11AWH Non Programmable Thermostat Installation Guide

PROSELECT PSTSN11AWH Non Programmable Thermostat Installation Guide

Troubleshooting  
If you have difficulty with your thermostat, please try the following suggestions.  
Most problems can be corrected quickly and easily.  
Display is blank  
Thermostat can be powered by AA Alkaline batteries, with a common wire  
to C, or both. Verify 24 volt power or AA batteries are good. Check circuit  
breaker and reset if necessary.  
Check circuit breaker and reset if necessary.  
Make sure power switch for heating & cooling system is on.  
Make sure furnace door is closed securely.  
Make sure fresh AA alkaline batteries are correctly installed (see page 3).  
Heating or  
cooling system  
does not respond  
Press Mode button to set system Heat (see page 5). Make sure the  
desired temperature is set higher than the inside temperature.  
Press Mode button to set system Cool (see page 5). Make sure the desired  
temperature is set lower than the inside temperature.  
Check circuit breaker and reset if necessary.  
Make sure power switch for heating & cooling system is on.  
Make sure furnace door is closed securely.  
Wait 5 minutes for the system to respond.  
Temperature  
settings do not  
change  
Make sure heating and cooling temperatures are set to acceptable ranges:  
Heat: 32 °F to 90 °F (0 °C to 32.0 °C)  
Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C)  
“Cool On” or  
“Heat On” is  
flashing  
Compressor protection feature is engaged. Wait 5 minutes for the system to  
restart safely, without damage to the compressor.  
Aux heat runs in  
cooling  
For heat pump systems, verify there is not a wire attached to the W terminal  
on the base plate.  
Cool runs with a  
call for heat  
For heat pump systems, verify there is not a wire attached to the W terminal  
CAUTION: ELECTRICAL HAZARD  
Can cause electrical shock or equipment damage. Disconnect power before  
beginning installation.  
CAUTION: EQUIPMENT DAMAGE HAZARD  
Compressor protection is bypassed during testing.To prevent equipment  
damage, avoid cycling the compressor quickly.  
CAUTION: MERCURY NOTICE  
If this product is replacing a control that contains mercury in a sealed  
tube, do not place the old control in the trash. Contact your local waste  
management authority for instructions regarding recycling and proper  
disposal.  
CAUTION: ELECTRONIC WASTE NOTICE  
The product and batteries should not be disposed of with other household  
waste. Check for the nearest authorized collection centers or authorized  
recyclers.The correct disposal of end of life equipment will help prevent  
negative consequences for the environment and human health.  
10  
GeneralDetails
NamePROSELECT PSTSN11AWH Non Programmable Thermostat Installation Guide
MakePROSELECT
LanguageEnglish
FiletypePDF (Download)
File size2.37 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

PROSELECT PSTSN11AWH Non Programmable Thermostat Installation Guide