Home > Pro1 Technologies > Pro1 Technologies Pro1 T701i WiFi Thermostat Installation Guide
Pro1 Technologies Pro1 T701i WiFi Thermostat Installation Guide
WIFI Setup
W
I
F
I
S
e
t
u
p
The following WIFI Technician steps are intended for viewing
information and resetting your WIFI connection. They are not typically
necessary for installation or initial setup.
WIFI Reset Process
This step resets the WIFI connection when needed for applications like
replacing WIFI routers, changing networks, or any other time you might
need to disconnect and reconnect your thermostat to a local WIFI
network.
1. Press and hold the + and – buttons together for 3 seconds.
2. Press and hold the WIFI Button on the lower left.
3. Use the + or - buttons to change settings and the lower left and right
buttons to move from one step to another. To exit tech setup: press and
hold the + and - buttons for 3 seconds or wait 60 seconds.
1. Enter the WIFI Menu and cycle through the steps until you get to the
RESET WIFI setting.
2. Hold the + button for three seconds.
LCD Will Show Adjustment Options
Default
Tech Setup Steps
3. You will now be automatically returned to the home screen and “WIFI
RESET”network will be displayed indicating the thermostat is no longer
connected to the local WIFI network. You will need to recommission the
thermostat to control your system from the PRO1 Connect App.
This displays the WIFI Firmware
N/A
SSID
Identification Number which can
be used for trouble shooting. If
the thermostat is not connected
to WIFI it will display “WIFI IDLE”.
WIFI SSID
N/A
FW011500
N/A
This displays the Thermostat
Firmware Identification Number
which can be used for trouble
shooting.
FW
Firmware
N/A
YES
990914
Hold the
button for
This step resets the WIFI
connection when needed allowing
you to reconnect to a new local
WIFI network.
YES
three seconds and you will
be returned to the home
screen. WIFI RESET will not
be displayed.
Reset WIFI
WIFI RESET
9
10
Specifications
WIFI Setup
WIFI Setup
Specifications
Operation of the FAN & SYSTEM button when connected to
WIFI and running a programmable schedule from the app:
The display range of temperature ... 41˚F to 95˚F (5˚C to 35˚C)
The control range of temperature.... 44˚F to 90˚F (7˚C to 32˚C)
Load Rating............................................... 1 amp per terminal, 1.5 amp
maximum all terminals combined
Swing (cycle rate or differential) ...... Heating is adjustable from 0.2˚ to 2.0˚
Cooling is adjustable from 0.2˚ to 2.0˚
When the set at temperature is changed while an app schedule is
running, the thermostat will enter a temporary hold, and the Fan and
System buttons change to RUN and HOLD for 15 seconds. If you wish to
enter PERMANENT HOLD press the HOLD button at this time.
Power source ...........................................18 to 30 VAC, NEC Class II, 50/60 Hz
for hardwire
Operating ambient ............................... 32˚F to +105˚F (0˚C to +41˚C)
Operating humidity .............................. 90% non-condensing maximum
Dimensions of thermostat ................. 4.7”W x 4.3”H x 0.9”D
If you don’t press the HOLD button when the HOLD icon appears the
thermostat will remain in temporary hold for 4 hours.
When connected to WIFI you may also have the ability to turn
programming ON or OFF by pressing and holding the FAN button for
3 seconds.
WIFI
Frequency Range............2.4 Ghz ISM radio band
WIFI Module...............................Supporting 802.11
B/G/N Standards
11
| General | Details |
|---|---|
| Name | Pro1 Technologies Pro1 T701i WiFi Thermostat Installation Guide |
| Make | Pro1 Technologies |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.26 MB |

Pro1 Technologies T855iSH Wall Thermostat Instruction Manual

Pro1 Technologies T751 Non-Programmable Digital Thermostat Instruction Manual
















