2. Impoant Information(Failure To Follow These Safety Instructions → Could Result In Fire, Electric Shock, Or Other Injury Or Damage. → Professional Installation → Electrical Safety → Installation Location)
3. In The Box(Wi-fi → Backplate → Trim Plate → Thermostat → C-wire Adapter (optional) → Zone Sensor (optional))
8. Step 6. Check Which Set Of Labels You Will Be Using(If Your System Has A Heat Pump, Please Use The Heat Pump Wire Labels Or The Set Of Wires That Includes The 'o/b' Label. → If Your System Does Not Have A Heat Pump, Please Use The Conventional Wire Labels Or The Set Of Wires Without The 'o/b' Label.)
13. Step 10. Pull The Wires Through The Backplate(Step 11. Attach The Backplate To The Wall → Optional: Use The Trim Plate To Cover Screw Holes Or Gaps Left Over From Your Old Thermostat's Installation.)
24. Step 18. Pull The Wires Through The Backplate(Step 19. Attach The Backplate To The Wall → Optional: Use The Trim Plate To Cover Screw Holes Or Gaps Left Over From Your Old Thermostat's Installation.)
Loading...
