Home > Honeywell > Honeywell RLV4305A1000 Programmable Thermostat Owner’s Manual

Honeywell RLV4305A1000 Programmable Thermostat Owner’s Manual

2
Away temperature  
Set the temperature you wish to use when the thermostat is in Away mode  
(see page 6).  
3
Daylight Saving Time  
When the Daylight Saving Time function is enabled (On), the thermostat au-  
tomatically switches to Daylight Saving Time on the second Sunday of March  
and to normal time on the first Sunday of November.  
4
Year, Month, Day  
These parameters are available only if the Daylight Saving Time function is  
enabled (On).  
5
Early Start  
Early Start is used in Automatic mode only. When Early Start is enabled (On),  
the thermostat determines when to start heating so the desired temperature  
is attained at the beginning of Wake and Return periods. When Early Start is  
disabled (Off), heating starts only at the beginning of Wake and Return peri-  
ods; thus there is a delay before you reach the desired temperature.  
6
Keypad lock  
The settings are locked. The temperature adjustment buttons only allow you  
to view the temperature setpoint.  
Troubleshooting  
Your thermostat requires little or no attention. Most problems can generally  
be traced to the following:  
Problem  
Solution(s)  
Thermostat is hot.  
This condition is normal. Ensure that the heater capacity does not  
exceed the thermostat’s maximum load.  
Wrong temperature is  
displayed.  
Correct it if any of the following situations exists:  
• The thermostat is exposed to an air draft.  
• The thermostat is located near or above a heat source such as a  
light dimmer  
Wrong time is displayed. The thermostat was without power for more than 5 hours.  
Temperature does not Check that the thermostat is in Automatic mode.  
change according to the Check the schedule and clock settings. If the thermostat is  
programmed schedule.  
configured in 12-hour format, ensure that PM appears on the screen  
when afternoon times are displayed.  
LP appears on the  
The thermal circuit breaker in the heater is opened.  
screen or the screen is  
This can happen if the heater is obstructed by furniture or curtain  
blank despite there is no and has overheated, or if the thermal circuit breaker is defective or  
power outage.  
too sensitive.  
The settings cannot be  
changed.  
The settings are locked (see page 7).  
8
GeneralDetails
NameHoneywell RLV4305A1000 Programmable Thermostat Owner’s Manual
MakeHoneywell
LanguageEnglish
FiletypePDF (Download)
File size0.44 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH2510/RTH2410 Thermostat Installation Guide
Honeywell RTH2510/RTH2410 Thermostat Installation Guide

Honeywell RLV4305A1000 Programmable Thermostat Owner’s Manual