GENERAL HT250 Smart Room Thermostat User Manual

1

2

TECHNICAL DATA  

ROOM THERMOSTAT PLACEMENT  

RECEIVER INSTALLATION  

ENGLISH  

Room Thermostat  

The room thermostat needs to be placed in the room which is used most  

frequently. For instance; the living room or lounge. Placing the room  

thermostat in a spot that has air circulation like the entrance of a room or the  

side of the window should be avoided. Also anywhere close to  

heating/cooling units such as a radiator, stove, and spots that get direct sun  

lights would not be suitable. The room thermostat needs to be located  

above the floor 150 cm in height. Few trials may be made to find the most  

convenientspot.  



First, shut down your heating/cooling unit and your heating/cooling unit's  

power sourcewithallelectricalcurrent(fuse, socket, etc.)  

As shown in the connection diagram, connect one end of the  

heating/cooling unit connection cable to the COM and the other to the NO  

input of thereceiver.  

Dimensions (H/L/W)  

Operating Current  

85mm / 125mm / 24mm  

3V DC (2 x AAA Alkaline Battery)  



SMART ROOM THERMOSTAT  

Temperature Measurement Accuracy 0.1^oC  

Operating Sensitivity  

Operating Temperature Range  

Battery Life  

Operating Temperature  

Storage Temperature  

(-2.0^oC) – (+2.0^oC)  

(5^oC) – (40^oC)  

generallife.com.tr  



Connect the other ends of the cable -which you connected to the receiver-  

to the room thermostat connection terminal as shown in your  

heating/cooling unit's user manual.  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  







You must first connect the receiver power cable to the receiver and then to  

thefuse to which the heating/cooling unit is connected.  

After completing the cable connection process, first, turn on yourfuse and  

then yourheating/cooling unit.  

HT250 SMART USER MANUAL  

min. 20 cm  

Receiver  

Dimensions (H/L/W)  

Operating Current  

Relay NO Switching Current  

90mm / 90mm / 25mm  

230V AC  

7A (240VAC – Resistive Load)  

10A (120VAC – Resistive Load)  

(-20^oC) – (+60^oC)  

WHAT IS A SMART ROOM THERMOSTAT?  

A smart room thermostat is a device that allows you to control your heating  

equipment via APPwiththe internetevenwhen youarenot athome.  

Finish the installation of the room thermostat to pair the receiver with the  

room thermostat.  

Storage Temperature  

ROOM THERMOSTAT  

1

RECEIVER WIRING DIAGRAM  

AC  

(230V)  

HOW DOES HT250 SMART WORK?  

COM  

NO  

HT250 SMART is a smart wireless room thermostat. You can control it with  

the mobile applicationafter you pair your room thermostatwith the receiver,  

andcompletetheinstallationofthesmartreceiver.  

2

WHAT ARE THE ADVANTAGES OF THE HT250 SMART?  









You can control your home's temperature via its mobile application, no  

matterwhereyouarein the world.  

3

4

You can easily create daily and weekly schedules via its mobile  

application.  

5

6

HEATING/COOLING UNIT  

You can place the room thermostat anywhere in your home, thanks to its  

use withbatteries.  

BATTERY PLACEMENT  

1

2

3

Battery Indicator  

Room Temperature  

Set Temperature  

Cooling Indicator  

Warning!  

Operations within the heating/cooling unit or the electrical installation must  

be carriedout byprofessionally qualified persons.  

It ensures that your living space stays at the desired temperature at any  

time. In this way, you can save up to 30% on your bills by preventing your  

heating unit from working unnecessarily.  

4

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

ON/OFF and Temperature Setting Button  

PAIRING THE ROOM THERMOSTAT WITH THE RECEIVER  

RULES THAT NEED TO BE OBSERVED FOR SAFETY  

1-Be sure to read the user manual before using the device and its  

equipment.  



To pair the room thermostat with the receiver, press the “Manual  

Operation Button” and “Wi-Fi Pairing Button” together at the same time  

and seethereceiver's fastblinking red LED.  

5

6

2-Opening, disassembly, or use of plastic parts of the product and  

equipment other than theintended purpose areout of warranty.  

3-Please make sure that the sockets to which you connect your devices and  

equipment areattherecommended voltagevaluein the user manual.  

4-Keep away and protect your product and its equipment from all kinds of  

externalsubstances such asliquid, dust, heat, etc.  









Press thebutton for 3 seconds while yourdeviceis turned off.  

Pressthebutton until “  

” thepairing menu appears.  

Note: During active use of the room thermostat, the symbols indicated by 3,  

Turn yourroom thermostat's button while theLEDis fastblinking red.  

If the pairing is successful, the fast red flashing LED on the receiver will be  

steady.  

4 and 5 will not appear on thescreen.  

Press the screwdriver forward from the space at the bottom of the room  

thermostat, bend the tabs and separate the front cover. Insert 2 new AAA  

alkaline batteries in the battery housing with the correct battery direction.  

Replace both batteries at the same time. Align the front part of your room  

thermostat with the corresponding slot on the back, and then push gently  

until thethermostatsnaps into place.  

RECEIVER  



The receiverand room thermostathavebeen paired witheach other.  

5-Do not expose the device cables to any jamming and pressure. Take care  

to connect the devices' energy connection to the sockets you can always  

reach.  

1-Manual Operation Button:  

Deactivates the receiver and allows users  

SMART RECEIVER SETUP  



1

For smart receiver setup, download the application from App Store or  

Google Play or scan the QR code below with your smartphone. In this way,  

you will be able to download the mobile application from App Store or  

Google Play to your smartphone. (You may be required to have a QR code  

reader application depending on the brand and model of your phone, for  

this process.)  

to manually use the heating/cooling unit.  

2-Wi-Fi Pairing Button:  

Makes the receiver ready for smart  

6-Turn off the electrical power to prevent damage to your device and  

apparatus in caseof lightning and thunderstorms.  

2

Low Battery Warning: When the “  

” icon appears on the screen, it means  

3

“low battery warning”. It is recommended to replace the batteries when this  

warning appears.  

7-Turn off theelectricalpower when yourdeviceis not used for along time.  

8-Your devices and equipment should be used by paying attention to the  

matters stated in the user manual. In case of damage and malfunctions,  

arising from improper use (contact with liquid, falling to the ground, etc.)  

definitelyaskfor theinstaller's help.  

installation.  

3-Receiver LED Light  

4- Receiver Power Cable Input  

5- Heating/Cooling Unit Connection Cable  

Input  

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out of  

warranty. Pleasethrowyour dead batteries into thewastebin for batteries.  

9-Call our service for maintenance and repair of HT250 SMART and its  

equipment. Maintenance and repair of the device and equipment should be  

carried out only by the technical service of ISIPARK A.S. and its authorized  

services, spare parts, and accessories specified by the company should be  

used.  

RECEIVER PLACEMENT  

The important things to note for the Receiver placement  

are avoiding physical contact between the receiver and  

the heating/cooling unit, and protecting it against  

materialssuch asliquid, dust, etc.  

4

5

RECEIVER LED DESCRIPTIONS  



Complete the user registration process by opening the mobile application  

thatyoudownloaded.  

Blinking Red  

The receiver did not get any signal from the  

HT250 SMARTand EQUIPMENT  

heating/cooling unit for 22 minutes or longer and  

the heating/ cooling unit has shut down.  

Waiting for a pairing signal from the room thermostat.  

The receiver and the room thermostat have been paired.  

Smart installation has not been completed.  

The receiver is in Bluetooth searching mode.  

Smart installation has been completed.  

The heating/cooling unit is not working.  

The heating/cooling unit is working.  





Open theBluetooth from yourmobile phone's settings.  

After you completed the user registration process, press the “+” button in  

the top-right corner of the main screen of the application, Press the  

receiver's Wi-Fipairing button for 5 seconds.  

The devices should be placed to minimize the damage to the received and  

transmittedsignals bypayingattentiontothefollowingpoints;  

HT250 SMART  

Room Thermostat  

Holder Alkaline  

Battery  

Receiver  

Dowels and  

Screws  

Fast Blinking Red  

Steady Red  





The devicesshould not be mounted on metalsurfaces.  

The devices should not be installed close to electrical cables and  

electronic equipment such ascomputers and televisionunits.  

The devices should not be installed near large metal structures or other  

building materials using fine metal meshes such as special glass or  

special concrete.  





The LEDon thereceiverwillstart to blink green.  

Blinking Green  

Steady Green  

Setup will begin with Bluetooth in the application. When the device is  

found, pressthe“Add” button.  



Steady Turquoise  

3 Short Red Blinking  





Press the “+” button near the W Modem device and press the “Next”  

button aftermaking surethatyouentered thecorrectWi-Fiinformation.  

Wait until the setup process is completed. When you saw the green  

approvalsymbol on the W Modem, press the “Done” button in the top-right  

corner.  

Shut the heating/cooling unit down signal has  

reached the receiver.  





Distance between the room thermostat and the Receiver should not  

exceed 20metersor 2 floors.  

3 Short Green Blinking Operate the heating/cooling unit signal has  

reached the receiver.  

Blinking Red and Green The heating/cooling unit is working in manual mode.  

The receiver must be installed at least 50 cm away from the  

heating/cooling unit.  

2

1

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL HT250 Smart Room Thermostat User Manual
Make	GENERAL
Language	English
Filetype	PDF (Download)
File size	2.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL

GENERAL HT250 Smart Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Room thermostat placement is crucial for effective temperature control. It should be placed in the most frequently used room, avoiding areas with direct sunlight or near heating/cooling units. The room thermostat must be installed at a height of 150 cm above the floor. Receiver installation requires connecting the heating/cooling unit connection cable to the COM and NO inputs of the receiver. A smart room thermostat allows remote control of heating equipment via an app. The HT250 smart thermostat can help save up to 30% on heating bills by maintaining desired temperatures. Safety rules include ensuring qualified personnel handle electrical installations and avoiding exposure to liquids and dust. To pair the room thermostat with the receiver, specific buttons must be pressed simultaneously. Receiver placement should avoid physical contact with heating/cooling units and protect against liquids and dust. Receiver LED indicators provide information on the device's status, such as pairing and operational signals. The devices should not be installed near metal surfaces or electronic equipment to minimize signal interference.
• Page 2: Heating/Cooling Unit Room thermostat temperature calibration Temperature sensors used in room thermostats are highly sensitive. The repair period of the product cannot exceed 20 working days. Your room thermostat has heating and cooling modes. You can reset your room thermostat to its default factory settings. The warranty period starts from the invoice date and is warranted against manufacturing defects for 2 years. The hysteresis positive factory setting of your room thermostat is 0.5°C. Your room thermostat measures sudden temperature changes with its open window detection feature. Malfunctions resulting from the use of devices contrary to the user manual are not covered by the warranty.