EUROSTER 2006TXRX Wireless Programmable Thermostat Installation Guide
EUROSTER 2006TXRX – INSTALLATION AND OPERATION MANUAL
8
Green – normally open mode (COM – NO). It is the most commonly used operation mode.
While the device operation indicator is active the output cables are shorted.
Red – normally closed mode (COM – NC). While the device operation indicator is active the
output cables are opened.
Caution! Normally open mode (COM – NO) is preset by default.
8. FIRST START
After being connected to the power socket the receiver signals the transmitter operating mode.
A flash of the green LED – normally open mode (COM – NO), a flash of red LED – normally
closed mode (COM – NC).
Each and every change to thermostat status (switching the heating on/off) is executed by the
receiver instantly, whereas the signalization confirming the reception of the radio signal from
the transmitter is repeated every 15 minutes.
8.1. Strength of radio signal
Information on the strength of the radio signal is communicated together with the signalization
of the reception signal from the transmitter. The reception of the radio signal is signaled in
greed. Three flashes of the LED stand for exceptionally good reception, two flashes stand for
good reception, and one flash – for sufficient reception.
8.2. Lack of radio communication
If the communication between the thermostat and the receiver is interrupted (e.g. discharged
batteries) and such status lasts for 2 minutes (no response from the receiver) then the
receiver switches into the frost protection mode. The heating device will be switched on for 20
minutes every 3 hours so that the rooms are not cooled down. At the time of re-establishing
communication (replacement of batteries), the receiver turns the system off and automatically
resumes the operation.
Lack of radio communication is signaled by a fast flashing green LED.
8.3. Continuous operation of the heating device (MAN)
In the case of system failure, it is possible to switch the system on manually. Move the switch
on the RX receiver to the MAN position. Such status is signaled by fast flashing red LED (in the
heating mode) or blue LED (in the cooling mode).
8.4. Receiver signaling table
Function
Signal
Pairing
Blue
Reception of radio signal
Green
Lack of signal
Green – flashing
Red
Red – flashing
Blue
The heating device switched on
Manual mode in heating operation
The air-conditioning device switched on
Manual mode in air-conditioning operation
Blue – flashing
9. Sample Connection Diagrams
The following diagrams are simplified and do not cover all elements necessary for the correct
installation.
In arrangement with a 230 V 50 Hz device
1. Electrical connection block
2. Output cable using COM - NO contact (normally open)
| General | Details |
|---|---|
| Name | EUROSTER 2006TXRX Wireless Programmable Thermostat Installation Guide |
| Make | EUROSTER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.28 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EUROSTER 4040 Smart Programmable Thermostat User Manual
EUROSTER 2026TXRX Air Conditioning Thermostat Instruction Manual
e l m leblanc TRL 7.26 RF Room Thermostat User Manual
BOSCH RT_II_230V Room Thermostat Instructions
Aprilaire S84N 1H1C Programmable Single Stage Universal Thermostat Owner’s Manual
GENERAL LIFE FH252S Underfloor Heating Thermostat User Manual
Neomitis RTMA Mechanical Room Thermostat Instruction Manual
GENERAL LIFE SOLARA 300S RF Wireless Room Thermostat User Manual
DAIKIN EKRRVATR2BA Home Controls Radiator Thermostat User Guide
namron 16A 2.0 Zigbee Touch Thermostat Instruction Manual
GENERAL LIFE HT250 RF Digital Room Thermostat User Manual
GE APPLIANCES RAK160W2 Wireless Thermostat User Manual