ENGO E55W230WIFI Wi-Fi Thermostat User Guide
Installation thermostat in the app
Installer parameters
3
4
5
Make sure your router is within range of your smartphone. Make sure you are
connected to the Internet. This will reduce the pairing time of the device.
Default
value
Pxx
Function
Value
Desription
WI-FI 2.4GHz
********
Heating
Cooling
P01 Heating/Cooling Selection
STEP 1 - DOWNLOAD ENGO SMART APP
TPI UFH
TPI RAD
TPI ELE
HIS 0.4
HIS 0.8
HIS 1.2
HIS 1.6
HIS 2.0
HIS 3.0
HIS 4.0
TPI for Underfloor Heating
TPI for Radiators
TPI for Electrical Heating
SPAN +/-0,2°C
Download the ENGO Smart app from Google Play or Apple App Store and install
it on your smartphone.
In the app, select:
„Add Device”.
After finding the
thermostat, go„Add”.
Select the Wi-Fi network
in which the thermostat
will operate and enter the
password of this network.
SPAN +/-0,4°C
SPAN +/-0,6°C
SPAN +/-0,8°C
SPAN +/-1,0°C
SPAN +/-1,5°C
SPAN +/-2,0°C
P02
Control algorithm
HIS 0.2
6
7
8
-3.5°C do If the thermostat indicates wrong temperature,
+3.5°C
P03
P04
P05
P06
Offset temperature
Relay type
0°C
NO
you can correct it by max 3.5°C”
STEP 2 - REGISTER THE NEW ACCOUNT
NO
NC
Normally Open type of relay
Normally Closed type of relay
To register a new account, please follow the steps below:
3
The thermostat has
been installed and
displays the main
interface.
Minimum heating / cooling temperature that
can be set
Minimum setpoint
Maximum setpoint
5°C - 20°C
5°C
Wait for the app to
configure the
thermostat with the
selected Wi-Fi network.
Go„DONE”.
2
3
4
1
Maximum heating / cooling temperature that
can be set
20°C - 45°C
35°C
1
2
3
Disable
P07
P08
P09
P10
S1/S2 Input
External sensor as a floor sensor
External sensor as an air sensor
1
Factory reset
In order to protect the floor, the heating will be
5°C - 45°C turned off, when the temperature of the floor
sensor rises above the maximum value.
Click„Register”
to create new account.
Enter your e-mail
address to which the
Enter the verification code Then set the login
received in the email. password.
Maximum floor
temperature for heating
35°C
10°C
15°C
To RESET Thermostat to factory settings,
hold down the buttons until the
verification code will Remember that you only
be sent.
&
have 60 seconds to enter
the code!!
In order to protect the floor, the heating will be
5°C - 45°C switched on, when the temperature of the floor
sensor drops below the minimum value.
FA message appears. Then release the keys.
Thermostat will restart, restore default factory
settings and displays the home screen. The
device will be removed from the app you will
need to add it again.
Minimum floor
temperature for heating
SET
In order to protect the floor, cooling will be
5°C - 45°C switched on, when the temperature of the floor
sensor exceeds the maximum value.
Maximum floor
temperature for cooling
STEP 3 - CONNECT THE THERMOSTAT TO WI-FI
After installing the app and creating an account:
In order to protect the floor, cooling will be
5°C - 45°C turned off, when the temperature of the floor
sensor drops below the minimum value
Minimum floor
temperature for cooling
P11
P12
7°C
OFF
1
2
ON
OFF
NO
Function enabled
Function disabled
Function disabled
Function enabled
Installer settings
To enter installer parameters press and hold button for 3 seconds.
Valve protection
1
2
P13 PIN Code for settings access
NO
000
NO
PIN
SET
3 sec.
3 sec.
P14
PIN code
000-xxx
User PIN
On your mobile device, make sure the
ENGO Smart has access to permissions
(Location, Bluetooth, Nearby devices).
Then turn on Bluetooth and Location.
Connect to 2.4GHz Wi-Fi network to
which you want to assign the device.
Make sure the thermostat is
powered on. Then press and hold the
buttons on the thermostat for approx.
3 seconds until the display shows„PA”.
Then release the keys. The pairing
mode will be started up.
NO
Function disabled
Function enabled
Require a PIN to unlock the
P15 keys every time (function
active when P13=PIN)
YES
3 sec.
NO
No
Restoration default
value
Use
or
. button to move between parameters. Enter the parameter by
or
CLR
NO
YES
Yes
. Edit the parameter using
with the button.
. Confirm the new parameter value
| General | Details |
|---|---|
| Name | ENGO E55W230WIFI Wi-Fi Thermostat User Guide |
| Make | ENGO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.2 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ENGO E20i Series Wi-Fi Wireless Internet Thermostat User Guide
ENGO EONEBATW, EONEBATB Internet Controlled Thermostat User Guide
ENGO E901 Programmable Wired Thermostat User Manual
ENGO E901 Wireless Internet Thermostat User Manual
ENGO EASY230W Wired Thermostat User Guide
ENGO EASYBATB Wired Battery Thermostat User Guide
Engo EFAN-230 Zigbee Smart Thermostat Owner’s Manual
Honeywell FocusPRO TH5000 Series Non-Programmable Digital Thermostat Instruction Manual
stelpro STZW402 ELECTRONIC THERMOSTAT SMART HOME User Guide
DEVI 316 Electronic Thermostat Installation Guide
seitron DR R02M Thermostat Wireless Kit Instruction Manual
tado 104388 Smart Thermostat
SALUS Wired Thermostat Installation Guide
SIEMENS RDF660MB Flush Mount Room Thermostat Instruction Manual
sinope TH1124NP Non Programmable Thermostat for Electric Heating Owner’s Manual
King K901-B Wifi Programmable Thermostat Instruction Manual
ENGO E901 Wireless Internet Thermostat User Manual