Home > Danfoss > Danfoss TP5000 Si Electronic 5-2 Day Programmable Room Thermostat Installation Guide

Danfoss TP5000 Si Electronic 5-2 Day Programmable Room Thermostat Installation Guide

Option 12 - Optimum start control pre-heat setting  
(Option 11 set to 1)  
GB  
Press + until Option 12 is displayed, use Λ and V  
to select required setting (only active if Option 11  
is set to 1).  
The optimum start control must be adjusted to match the building  
energy characteristics. Use the Λ and V keys to selected the required  
pre-heat period. The table below suggests typical settings.  
If the building fails to reach temperature on time, increase the setting  
by 15 minute steps each day until the correct setting is found.  
If the building reaches temperature ahead of time, decrease the  
setting by 15 minute steps each day until the correct setting is found.  
0:15  
15 mins, warm air systems, well insulated building.  
0:30  
30 mins, warm air systems, well insulated building.  
0:45  
45 mins, warm air system poorly insulated building.  
1:00  
60 mins, radiator system, light weight well insulated building.  
(Factory setting)  
1:15  
75 mins, radiator system, light weight medium insulation.  
1:30  
90 mins, radiator system, medium weight poorly insulation.  
1:45  
105 mins, radiator system, heavy weight building, well insulated.  
2:00  
120 mins, radiator system, heavy weight building, poorly insulated.  
Option 13 - Optimum start control/Delayed start event setting  
(Option 11 set to 1 or 2)  
The Optimum start or delayed start control can  
be applied to event 1 only or to each event of the  
day which requires a higher temperature than the  
previous event. Press + until Option 13 is displayed,  
use Λ and V to select required setting (only active if  
Option 11 is set to 1 or 2).  
Setting 0 Applies only to first event of day. (Factory setting)  
Setting 1 Applies to each event of the day that requires a higher  
temperature compared to previous event.  
28  
GeneralDetails
NameDanfoss TP5000 Si Electronic 5-2 Day Programmable Room Thermostat Installation Guide
MakeDanfoss
LanguageEnglish
FiletypePDF (Download)
File size0.42 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Danfoss RET-MD Electronic Intelligent Dial Setting Thermostat Installation Guide
Danfoss RET-MD Electronic Intelligent Dial Setting Thermostat Installation Guide
Danfoss VICUQ24M Icon Programmable II Room Thermostat Installation Guide
Danfoss VICUQ24M Icon Programmable II Room Thermostat Installation Guide
Danfoss MBC 8000, MBC 8100 Heavy Duty Thermostat Installation Guide
Danfoss MBC 8000, MBC 8100 Heavy Duty Thermostat Installation Guide
Danfoss UT 72-UT 73 Universal Thermostat Installation Guide
Danfoss UT 72-UT 73 Universal Thermostat Installation Guide
Danfoss ECtemp 530 Electronic Thermostat Installation Guide
Danfoss ECtemp 530 Electronic Thermostat Installation Guide
Danfoss 014G0251 Eco Radiator Thermostat User Guide
Danfoss 014G0251 Eco Radiator Thermostat User Guide
Danfoss 014G0013 Z Wave Radiator Thermostat Installation Guide
Danfoss 014G0013 Z Wave Radiator Thermostat Installation Guide
Danfoss RET230P Electronic Thermostat Instruction Manual
Danfoss RET230P Electronic Thermostat Instruction Manual
Danfoss TP7000 Range Electronic 7 Day Programmable Room Thermostat Installation Guide
Danfoss TP7000 Range Electronic 7 Day Programmable Room Thermostat Installation Guide
Danfoss RET1000 Series Electronic Thermostat User Guide
Danfoss RET1000 Series Electronic Thermostat User Guide

Danfoss TP5000 Si Electronic 5-2 Day Programmable Room Thermostat Installation Guide