Home > Bio Green > Bio Green PAL 2.0 USDT Palma Greenhouse Heater with Thermostat Instruction Manual
Bio Green PAL 2.0 USDT Palma Greenhouse Heater with Thermostat Instruction Manual
Palma Twin Operating Instructions
US
4.4 Using the Palma Twin - Manual in "1.5kW heating mode"
If you want to heat a room or a greenhouse, use one of the two operating modes for heating. The "1.5kw
heating mode" is selected by setting the right-hand selection switch to the symbol. You can now
regulate the temperature with the left-hand temperature switch. If you are using the Palma Twin without a
digital temperature display, you can use a thermometer to determine the temperature in the room. If the
temperature is too high or too low, you can adjust it by turning the left thermostat switch. When the
desired room temperature is reached, slowly turn the thermostat counterclockwise until the switch-off
point is reached. The switch-off point means that the heating heats up to this point (heating is indicated by
the red signal light). If the left switch is set below this switch-off point, the fan heater does not heat, even
though you may have set the fan heater to "heating" mode. The fan heater always heats the room as
soon as the room temperature falls below the set level (switch-off point). You can also hear the switch-off
point by a "click" or recognise it by the signal light (above the switch-off point, the signal light lights up,
heating is in progress. Below the switch-off point the signal light does not light up, the Palma is not
heating). If there are temperature discrepancies, you must adjust them slightly. Due to the bimetal
thermostat's measuring tolerance of ± 41°F, it may be necessary to check the set temperature with a
thermometer and readjust if necessary.
Please note! Unfortunately, it is not possible to print a temperature scale on the thermostat switch,
as the behaviour of each greenhouse varies according to size, insulation, filling level and location.
The illustration shows as an example: Palma Twin set to 1.5kw heating on level 8.
Signal lamp
1.5kW heat output
14
| General | Details |
|---|---|
| Name | Bio Green PAL 2.0 USDT Palma Greenhouse Heater with Thermostat Instruction Manual |
| Make | Bio Green |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.39 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Danfoss RET Series Electronic Thermostat Instruction Manual
SALUS CONTROLS RT520 Thermostat User Manual
Beca BAC-1000 Series WiFi Thermostat User Guide
STN855W WiFi Digital Programmable Thermostat Instruction Manual
COPELAND 1F86-0244 Blue 2 Inch Single Stage Thermostat Instruction Manual
OJ ELECTRONICS MCD5 Touch Thermostat Instructions
PowerOptimal Elon Smart Thermostat User Guide
GENERAL LIFE HT500 SET Smart Room Thermostat User Manual
EUROTRONIC Sparmatic COMET Programmable Energy-Saving Radiator Thermostat User Manual
VIMAR 02970 Wheel Thermostat Instruction Manual