BeSMART 20143539 WiFi Smartphone Thermostat with Backlight User Guide
Direct functions
2
Desired room temperature
The thermostat can accept the setting of 3 different temperature level:
T3 = Comfort (day temperature) – in mode AUTO, PARTY and MAN
T2 = Economy (night temperature) – in mode AUTO and HOLIDAY
T1 = frost protection – in mode AUTO and OFF
The 3 temperatures can be changed when active; by moving the buttons UP (4) and DOWN
(6) if the thermostat is set on the mode related to this temperature level or from the
PROGRAMING MENU – T1-T2-T3
1
4
Working modes
Pressing the ESC-MODE (4) button, it is possible to select the following working mode:
AUTO = thermostat working in heating/cooling at temperatures level T3-T2-T1
according the selected hours.
2
5
MANUAL = thermostat working in heating/cooling at temperatures level T3
(Comfort) only, without any restriction on hours.
HOLIDAY = thermostat working in heating/cooling at temperatures level T2
(Economy) only for the number of days set, without any restriction on hours.
PARTY = thermostat working in heating/cooling at temperatures level T3
(Comfort) only, up to the midnight of that day, without any restriction on hours.
OFF = thermostat OFF (when ON/OFF connection) or boiler totally OFF (stand
by) (when OT-Bus connection).
3
6
DOMESTIC HOT WATER (DHW – SUMMER) = boiler in summer mode –
domestic hot water only (only available when OT-Bus connection and if the
protocol allow this).
Function RF pairing
Press for 5 seconds the ESC-MODE button (5), the thermostat will then enter RF coupling mode and this
function is needed to couple the thermostat with an RF receiver (WiFi Box or boiler receiver). Also the
boiler receiver or the WiFi Box must be moved to the same mode to complete the coupling operation (see
following page). Once completed, the two line display will disappear and the alphanumeric code of the
coupling will be shown
Function ADVANCED
Only in AUTO mode, by pressing the FORWARD button (1) the ADVANCED function is
enabled or disabled (if enabled the MAN icon is also shown on display). The function is
used to advance to the next scheduled heating program event (ON or OFF) with related set
temperature, possible up to midnight on that day. This temporary function is helpful when
arriving home early or leaving home before the next scheduled (OFF) event.
Function RESET
When an alarm code is displayed (only available if OT-Bus connection available between WiFi Box and
the boiler and if the OT-Bus protocol is allowed to this), it is possible make a reset of the alarm pressing
once the RESET button (3)
Function ONE HOUR BOOSTER
Only in AUTO mode, by pressing the BACK button (3) the ONE HOUR BOOSTER function
is enabled or disabled (if enabled the MAN icon is also shown on display). This function
switches ON the heating at T3 (Comfort) for 1 hour. If current time is already in T3
(Comfort), this function adds 1 hour to the current programmed time.
Function semi-automatic filling of the system (only for boilers incorporating this function)
On the thermostat display is shown “rIE” flashing when the system needs to be filled. It is possible to
activate the automatic filling by pressing the ESC-MODE button for 5 secs. At the end of the automatic
filling cycle, the display will resume to a normal visualization.
| General | Details |
|---|---|
| Name | BeSMART 20143539 WiFi Smartphone Thermostat with Backlight User Guide |
| Make | BeSMART |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.37 MB |





















