qunda QD-HVAC15 WIFI Touch-Screen Programmable Thermostat Instruction Manual
9.2 Network configuration(AP mode).
XXXXXX-XXX
XXXXXX-XXX
XXXXXX-XXX
XXXXXX-XXX
XXXXXX-XXX
XXXXXXXXXX
XXXXXX-XXX
XXXXXX-XXX
XXXXXX-XXX
XXXXXX-XXX
9.2.8 Find the corresponding
SmartLife-XXXX or SL-XXXX
and connect it.
9.2.9 Return to the network
configuration interface.
9.2.10 Success configuring
the internet, click Done
9.2.3 Choose WIFI and enter
the correct password, then
click the next step.
9.2.1 Click + at the upper right
corner or add device.
9.2.2 Choose the thermostat
on the list of home appliances.
9.3 Description of the control interface
9.3.1 Set temperature:
Slide the circle to adjust the setting temperature.
9.3.2 Room temperature:
Indicate the current room temperature.
9.3.3 Working mode:
Click mode symbol to switch the corresponding
working modes.
SET TEMPERATURE
CURRENT ROOM
TEMPERATURE
9.3.4 Working condition:
Indicate all the operation.
9.3.5 Power:
To turn on or turn off the power.
Fan mode:
To choose the fan mode is Auto or ON.
Run mode:
MODE
To choose the working mode is Manual or
Program. Manual corresponds with Hold
mode on the thermostat, and Program
corresponds with Run mode.
WORKING CONDITION
9.2.4 Click EZ mode at the
upper right corner to change
to AP mode.
9.2.7 According to the hint
click and connect it.
9.2.5 Long press the button
on the thermostat, hold it until
symbol flashes.
POWER / FAN / MODE / SETTING
9.2.6 Click confirm and the next
step.
12
13
| General | Details |
|---|---|
| Name | qunda QD-HVAC15 WIFI Touch-Screen Programmable Thermostat Instruction Manual |
| Make | qunda |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.42 MB |

qunda QD-HVAC10W Programmable Thermostat Installation Guide























