Home > IHAVC CONTROLS > IHAVC CONTROLS T-32-P Universal Thermostat Instruction Manual
IHAVC CONTROLS T-32-P Universal Thermostat Instruction Manual
Press the PROG key again and the LCD will display the word SET and the temperature setting for the
current mode (Heat or Cool). Press the ( ) or down ( ) key to change the setpoint. If Auto mode is
selected (shown by both Heat and Cool on the display), wait 3 seconds after adjusting the first mode
setpoint and the T-32-P will change to show the next mode setpoint. Press the up ( ) or down ( ) key
to change the setpoint.
Press the PROG key again and the LCD will display STOP. Follow the steps above to program the
STOP (unoccupied) time and temperature settings. Press the PROG key again and the word COPY
will appear on the LCD.
Option 1 - Copy Program
To copy the start and stop times you have
programmed to other days of the week, press the
COPY
up ( ) or down ( ) key and select each additional
day you wish to duplicate the program. Press the
PROG key again and the word COPY will flash
briefly to confirm the copy process. Normal
programming steps will resume showing the next
day to be programmed.
Option 2 - Different Daily Program
If you chose to have the next day represent a different start and stop time, simply press the PROG
key after the word COPY appears and the T-32-P will advance to the next day. Follow the same
programming steps as the prior day. This allows you to have a different start and stop time for each
day of the week.
Temporary Temperature Override
To place the T-32-P in the temporary temperature override mode, press the up ( ) or down ( ) key.
The LCD will show the word SET and the current mode (Heat or Cool). Press the up ( ) or down ( )
key to change the current temperature setting. Wait 3 second and the next mode (Heat or Cool) will
be displayed and can be changed. When the T-32-P will exit the override program. The word START
or STOP will flash confirming the override event. The HVAC installer will have set the override period
from 1 to 12 hours. If during the override period another event takes place, the override will be
canceled. To manually cancel the override, press the O/RIDE key twice. The thermostat will resume
the programmed schedule.
Permanent Temperature Hold
HOLD
Press the O/RIDE key. The LCD will show the word
. The current programmed heating and
cooling temperatures will be held permanently or can be adjusted by pressing the up ( ) or down ( )
key which will display the current program temperature along with the word SET. Press the up ( ) or
down ( ) key to change the temperature.
HOLD
To return to the programmed schedule, press the O/RIDE key until the word
is no longer
displayed.
7
| General | Details |
|---|---|
| Name | IHAVC CONTROLS T-32-P Universal Thermostat Instruction Manual |
| Make | IHAVC CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.34 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HITACHI ATW-RTU-12 Room Thermostat Instruction Manual
INKBIRD ITC-308-WIFI Digital Temperature Controller Thermostat Instruction Manual
GLOBAL HY09RF WIFI Wireless Thermostat User Manual
ELMEKO THRV 22 Double-Thermostat Owner’s Manual
beok TGW60 Thermostat User Guide
EPH CONTROLS CDT2 Room Thermostat Instruction Manual
GENERAL Life SOLARA 330S RF Wireless Room Thermostat User Guide
Danfoss RET Series Electronic Thermostat Instruction Manual
technolysis HY703RF WIFI Thermostat User Manual
NEOMITIS RTE0RFA Wireless Digital Room Thermostat and Receiver Instruction Manual