Home > IHAVC CONTROLS > IHAVC CONTROLS T-32-P Universal Thermostat Instruction Manual
IHAVC CONTROLS T-32-P Universal Thermostat Instruction Manual
FAN Selection
Press the FAN key to cycle through the fan selections. More details on fan functions can be found on
page 20 of this manual.
Auto The HVAC system fan will only run with a call for heating or cooling.
On
The HVAC system fan will run continuously.
Setting the clock
The T-32-P has a real-time clock that is used for
programming functions. It is important that the time
and day of week be set properly so that programmed
events run correctly.
Start
To set the clock, press the PROG key until the hour
flashes on the LCD. Use the up ( ) or down ( ) key to
set the current hour along with the AM and PM
symbol. Press the PROG key again until the minutes
flash. Use the up ( ) or down ( ) key to set the
current minutes. Press the PROG key again until the
day flashes. Use the up ( ) or down ( ) key to set the
correct day of the week. Press the PROG again to
exit the clock and day of week program.
UP / DOWN PROG
KEYS KEY
Programming 2 daily events
The commercial programmable mode provides 2 schedules per day using a separate heating and
cooling setpoint. The schedule is shown on the LCD as Start and Stop. Start represents the
occupied mode and Stop represents the unoccupied mode. Programming steps are the same as a
residential program other than there are only two events per day rather than four.
Entering the program mode
Hold the PROG key down for 3 seconds.
Start
The display will show Start (occupied) and the day
MON will flash.
Use the up ( ) or down ( ) key to set the day you
wish to start programming.
Press the PROG key again and the hour will flash.
Use the up ( ) or down ( ) key to set the hour you
wish the program to start. Make sure that the AM /
PM is correct.
Press the PROG key again and the minutes will flash.
Use the up ( ) or down ( ) key to set the minutes for
the program to start.
UP / DOWN
KEYS
PROG
KEY
6
| General | Details |
|---|---|
| Name | IHAVC CONTROLS T-32-P Universal Thermostat Instruction Manual |
| Make | IHAVC CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.34 MB |
(1 votes, average: 5.00 out of 5)
Loading...
LEDLux LL0167 WiFi Fan Coil Unit Thermostat Instruction Manual
BECA BHP-8000 Room Thermostat User Manual
sinope TH1400NP Non Programmable Low Voltage Thermostat Installation Guide
New Zealand Thermostat Underline Heating Kit User Guide
Honeywell TL116A Thermostat Installation Guide
Fantini Cosmi CH141E Battery Operated Weekly Programming Thermostat Owner’s Manual
ESPUK ECSPST Fort Programmable Thermostat User Manual
BOSCH Radiator Thermostat Instructions
FURRION FACW10ESSA-BL Standard Single Zone Wall Thermostat User Guide
ecoartheating B07QZRVC8K Temperature Controller Electric Thermostat Instruction Manual