Home > hyco > hyco PT01 Programmable Thermostat Instruction Manual

hyco PT01 Programmable Thermostat Instruction Manual

Overview  
Thank you for purchasing a Programmable Thermostat. It will give you easy control of your Mistral Plinth  
Heater from a wall mounted location near the heater.  
Please read and follow these instructions to ensure that installation and operation are as simple and safe  
as possible.  
1. Installation  
•
•
The programmable thermostat is designed to fit in a standard pattress box.  
It must be located within reach of the plinth heater cable.  
2. Electrical Connection  
This programmable thermostat should only be installed and maintained by a competent person in  
accordance with any local electrical regulations.  
•
•
•
•
Electrical connection should be made via a 13A switched fuse spur.  
Connect mains supply neutral and mains supply live to terminals 3 and 4 respectively.  
Connect plinth heater live and plinth heater neutral to terminals 1 and 2 respectively.  
Connect mains supply earth to plinth heater earth with terminal block or similar connector.  
3. Wall Mounting  
•
Using a flat head screwdriver carefully insert into either of the 2 slots on the under side of the  
programmable thermostat and pull upwards to release, repeat with the remaining slot.  
•
•
Lift the front cover away from the body of the programmable thermostat.  
Place the programmable thermostat into its required final mounting position and using the 2 fixing  
screws supplied secure in place.  
•
•
To refit the front cover place the top side first onto 2 tabs which should click when in place.  
The rest of the front cover should now push down and click to secure the programmable thermostat.  
2
GeneralDetails
Namehyco PT01 Programmable Thermostat Instruction Manual
Makehyco
LanguageEnglish
FiletypePDF (Download)
File size0.74 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

hyco PT01 Programmable Thermostat Instruction Manual