Honeywell TL116A Thermostat Installation Guide
TL116A
TL116A1008, TL116A1016
INSTALLATION INSTRUCTIONS
4. To limit the setpoint temperature range, insert the
pins in the orifices corresponding to the minimum
and maximum temperature limits.
READ BEFORE INSTALLING
ABOUT YOUR NEW
THERMOSTAT
SETPOINT RANGE LIMIT POSITIONS
M38220
This thermostat is designed to control an electric heating
system such as a baseboard heater, a convector or a fan-
forced heater.
WARNING
Use only the supplied plastic pins. Do not insert
metal objects in the holes.
The thermostat CANNOT be used with:
ELECTRICAL HAZARD
•
•
•
a resistive load under 1.25 A
a resistive load over 12.5 A (120/208/240V)
a system driven by a contactor or a relay (inductive
load)
5. Place the faceplate cover back.
•
a central heating system
FACEPLATE COVER ON
Supplied Parts:
•
•
•
One (1) thermostat
Two (2) screws
Two (2) solderless connectors for copper wires
TEMPERATURE SETTING KNOB
CAUTION
Special CO/ALR solderless connectors must be
used if the thermostat will be connected to
aluminum wires.
FIRE HAZARD
M38221
6. Apply power to the heating system.
TECHNICAL SPECIFICATIONS
INSTALLATION
Table 1.
Minimum
Load
Maximum
Load
WARNING
Can cause electrical shock or equipment damage.
Disconnect power before beginning installation.
The installation must be performed by a certified
electrician and must comply with electrical codes
of your region.
Supply
ELECTRICAL HAZARD
120 VAC, 50/60Hz
208 VAC, 50/60Hz
240 VAC, 50/60Hz
1.25 A (150 W) 12.5 A (1500 W)
1.25 A (260 W) 12.5 A (2600 W)
1.25 A (300 W) 12.5 A (3000 W)
Temperature setting range:
5°C to 27°C (41°F to 80°F)
1. Connect the thermostat as shown.
Operating temperature:
0°C to 50°C (32°F to 120°F) non-condensing
FOUR-WIRE INSTALLATION
TWO-WIRE INSTALLATION
120/208/240V
Storage temperature:
-20°C to 50°C (-4°F to 120°F)
CUSTOMER ASSISTANCE
If you have any questions on your thermostat, please go to
www.resideo.com, or call Resideo Customer Care toll-free
at 1-800-468-1502.
120/208/240V
M38218
2. Remove the thermostat faceplate cover by prying it
from the top or bottom with your fingers.
3. Install the thermostat onto the electrical box using
supplied screws.
WARNING
If this product is replacing a control that contains
mercury in a sealed tube, do not place the old
control in the trash. Contact your local waste
management authority for instructions regarding
recycling and proper disposal.
MERCURY NOTICE
FACEPLATE COVER OFF
MOUNTING SCREW OPENINGS
SETPOINT RANGE LIMIT PINS
M38219
Energy Verified
Only
69-2525EFS-07
| General | Details |
|---|---|
| Name | Honeywell TL116A Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.43 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
BlueLink 8205 Smart Wi-Fi Thermostat User Manual
VIVE TP-N-751 Programmable Thermostat Installation Guide
ARISTON 3319126 CUBE S NET Wi-Fi Thermostat User Manual
homematic IP HmIP-eTRV-2 Radiator Thermostat Instruction Manual
Danfoss RA2000 TRV Thermostat Instructions
Danfoss RT 8L Thermostat Installation Guide
ENGO CONTROLS ESIMPLE230W Non-Programmable Wired Thermostat User Guide
BHT-001Series Round Thermostat User Guide
DAIKIN S21 One Lite Smart Thermostat User Guide
RATE R8 Weekly Programmable Handwheel Thermostat Instruction Manual