Honeywell T6811DP08 Digital Thermostat Instruction Manual
T6811DP08/T6812DP08 DIGITAL THERMOSTAT
Installer Setup
1. Press and hold UP and MODE buttons simultaneously
for 3 seconds to enter the Installer Setup mode.
2. Press UP or DOWN button to change settings.
3. Press MODE button to advance to the next function.
4. Press and hold UP and MODE buttons simultaneously
for 3 seconds to exit and save settings.
No.
10
Description
Installer Test Heat
Possible Options
0 Heat Off
1 Heat On
30
Installer Test Cool
0 Cool Off
1 Cool On
70
71
72
73
Press UP button to see software info (71, 72 & 73)
Software version (Major)
No.
Description
System Type
Possible Options
0 Heat only
1
Software version (Minor)
1 Cool only
Identification code
2 Two pipes 1H1C manual
(Default)
Operating Your Thermostat
9
Temperature Scale
0 °F
1. Power On/Off
0 °C (Default)
Slide the POWER switch thermostat will enter the On/Off
mode.
13
14
18
CPH value For Heat 1–12
4 (Default)
CPH value For Cool 1–6
3 (Default)
2. Fan Switch
Slide the FAN switch to select Fan mode
Low,
Med,
High.
Display Temperature -2°C (-4°F)
adjustment
-1.5°C (-3°F)
3. System Mode Setting
Press the MODE button to choose
Heat,
Cool or
-1°C (-2°F)
Vent. In ventilation mode, only the fan will operate.
-0.5°C (-1°F)
0°C (0°F) (Default)
4. Temperature Setting
In Heat/Cool mode, press the or (UP or DOWN button)
to select the desired temperature setting.
0.5°C (1°F)
1°C (2°F)
1.5°C (3°F)
Table 1. Troubleshoting Tips.
2°C (4°F)
19
Temperature Display 0 Display Room
If...
Heating
system does
Then...
mode
Temperature (Default)
•
•
•
•
Set the mode to Heat
Mode button.
Check that the heat temperature setting is
above the room temperature.
by pressing the
1 Display Setpoint
not turn on
20
21
22
Heating Range Stops 10–32°C Default 32°C
(50–90°F) Default 90°F
Check heating on icon
shows solidly in
Cooling Range Stops 10–32°C Default 10°C
the display.
(50–90°F) Default 50°F
Wait five mintues for the heating system
to respond.
Keypad Lockout
0 All keys available (Default)
Cooling
system does
not turn on.
•
•
•
•
Set the mode to Cool
Mode button.
Check that the cool temperature setting is
below the room temperature.
Check cooling on icon
the display.
by pressing the
1 All keys locked out
Installer Test
shows solidly in
1. Press and hold UP and DOWN buttons simultaneously
for 3 seconds to enter the Installer Test mode.
2. Press UP or DOWN button to change settings.
3. Press MODE button to advance to the next function.
4. Press and hold UP and MODE buttons simultaneously
for 3 seconds to exit and save settings.
Wait five mintues for the cooling system to
respond.
The Mode
button doesn’t
work.
•
Check whether the keypad is locked or
not.
Check whether the thermostat is off.
•
•
The Up or
Down button
Check whether the keypad is locked or
not.
doesn’t work.
•
•
Check whether the system is working
Ventilation mode.
Check whether the thermostat is off.
3
62-0325ES—01
firealarmresources.com
| General | Details |
|---|---|
| Name | Honeywell T6811DP08 Digital Thermostat Instruction Manual |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.67 MB |

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide





















