Guangzhou XR-01 Central Air Conditioning Thermostat User Manual
The product specifications and information mentioned in this manual are for
reference only. Any updates to the content will not be notified separately. Unless
otherwise specified, this manual is only intended as a guide for use, and all statements,
information, etc. in this manual do not constitute any form of warranty.
This manual is for the use of the Xinrui XR-01. Please read this manual carefully
before using the XR-01 to ensure correct use. Incorrect use may cause accidents.
Please make sure to keep this manual properly so that it can be accessed at any time.
Open box inspection
Take out the Xinrui XR-01 from the packaging box and check whether the
product shell is damaged or deformed, and whether the accessories are damaged or
detached; Carefully verify whether the product meets your ordering requirements; If
you have any questions or if the product is damaged, please keep the original
packaging and accessories and immediately contact the supplier for resolution.
Product accessories
Install 2 screws
Safety precautions
① This product can only be used under normal conditions (all protective
functions are intact).
② Please confirm the power supply voltage before use and do not touch the
power cord interface of the device with your hands.
③
Ensure that the product operates within the normal operating
temperature/humidity range.
④ Do not apply excessive pressure to the LCD screen, as it may cause damage.
⑤ Do not allow water, mud or other debris to enter the thermostat.
1
Catalogue
Open box inspection........................................................................................................................... 1
Safety precautions...............................................................................................................................1
Catalogue...........................................................................................................................................2
1.1 Product Introduction.................................................................................................. 3
1.3 Main features of the product..................................................................................5
Chapter 2 Hardware Description................................................................................................ 5
2.1 Product appearance and dimensions........................................................................5
2.2 Product back appearance............................................................................................ 7
Chapter 3 Installation and Wiring Operation Guide..........................................................7
3.1 Installation and wiring instructions..................................................................8
3.2 Install wiring.............................................................................................................. 8
3.3 Key operation guide.................................................................................................. 11
3.4 Dismantling and replacement..................................................................................12
Chapter 4 Product Specifications and Parameters............................................................12
Product Warranty Statement...................................................................................................... 12
2
Chapter 1 Product Overview
1.1 Product Introduction
Firstly, thank you very much for using the Xinrui XR-01.
Xinrui XR-01 is the latest product developed for centralized management of central air conditioning. It
has the functions of setting the ambient temperature and the operation mode of the fan coil unit.
The XR-01 thermostat is suitable for central air conditioning systems with two or three wires. It is used
to control the opening and closing of the electric valve of the fan coil unit and the selection of three
levels of fan speed, to achieve temperature setting and monitoring. Through power line carrier,
low-power wireless and concentrator control signals and data communication, remote control of the
central air conditioning's on/off, operation status, etc. can be achieved.
By collecting NTC high-precision sensor signals and comparing them with the set temperature,
according to the set working mode, output control signals to control the electric valve and three levels
of wind speed, automatically adjust the amount of cold and warm air, and achieve the goal of
maintaining indoor constant temperature. The appearance is in the form of 86 boxes.
This product is widely used for temperature regulation in hotels, office buildings, and large conference
rooms. Its use will make your life more comfortable and convenient, and can also play a role in energy
conservation and consumption reduction
1.2 Typical applications and main functions of the product
The temperature controller XR-01 serves as an information acquisition and command execution
terminal to monitor the operation of central air conditioning. Its specific application in the
centralized air conditioning control system is shown in Figure 1.
The centralized air conditioning control system mainly consists of a monitoring center (including
control equipment, servers, display devices, and monitoring software), intelligent routers, terminal
controllers, and communication systems.
The Xinrui XR-01 is connected to the central air conditioning fan coil unit components and
communicates with the concentrator through power line carrier, RF wireless, and remote
communication between the concentrator and the monitoring center through Ethernet, GPRS, and
other methods. Monitoring software is installed on the monitoring center server. Meanwhile, the
remote monitoring center can remotely control the air conditioning system through servers and
databases.
The centralized air conditioning management system can be widely used in various office
buildings, dormitories, public facilities, and other places.
3
Figure 1 Schematic diagram of centralized air conditioning control system
The main functions of the XR-01 thermostat in the centralized air
conditioning management system are:
① Real time detection and control of central air conditioning switches and wind
speed.
② Detect indoor temperature, set and monitor temperature.
③ Receive and execute control commands from the concentrator to turn on, off,
and change the operating status of the air conditioner.
④ Support time slot control to determine whether air conditioning operation is
allowed, with a maximum of 4 time slots supported. Let users no longer worry about
energy waste and equipment loss caused by forgetting to turn off the air conditioner.
⑤ Support setting temperature limits: allowing the air conditioner to operate
only within the allowed temperature range.
⑥ The buttons can be remotely locked to prohibit the operation of the air
conditioner.
4
| General | Details |
|---|---|
| Name | Guangzhou XR-01 Central Air Conditioning Thermostat User Manual |
| Make | GUANGZHOU |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |
(1 votes, average: 5.00 out of 5)
Loading...
resideo P200 Series Focus PRO Thermostat User Guide
HomePilot 13501001 Wireless Room Thermostat User Guide
MoesGo 002 Series Wi-Fi Thermostat Instruction Manual
KALOR TECH 603H Thermostat Instruction Manual
Honeywell Home TH2110U4004 Programmable Thermostat Installation Guide
HIHOME Smart Radiator Thermostat User Manual
Stelrad Radiator Thermostat RAS-D2 Combi Pack, Radiator Pack Instructions
GENERAL LIFE 270 Wireless Room Thermostat User Manual
PECO T8168 Performance Pro Thermostat Installation Guide
FantiniCosmi CH143E 230V Flush Mounting Weekly Programmable Thermostat User Manual