Home > GE current > GE current WTS10 Daintree Wireless Thermostat Installation Guide
GE current WTS10 Daintree Wireless Thermostat Installation Guide
®
Daintree Networked Wireless Thermostat (WTS10)
Installation Guide
Installation Process Continued
Wiring: Thermostat Terminals
1
2
To prevent electrical shorts and potential damage to the
thermostat, ensure all of the base wire connections are secure
and are not touching any other terminal. Push any excess wire
back into the wall cavity and insulate the wire opening with
suitable material.
7. On the thermostat body, locate switch SW1 on the circuit
board as shown below. This is used to set the thermostat for
operation with the HVAC system.
8. Set switches as appropriate for your system:
System
Type
Source
Switch #1
Switch#2
Electric
Gas
E/B (on, up)
Conventional
STD (on, up)
G/O (off, down)
Heat
Changeover E/B (on, up)
Valve
Heat Pump
HP (off, down)
Cool
Changeover G/O (off, down)
Valve
9. Attach the thermostat front body to the base, being
careful to align the terminal pins on the front body with
the terminal block on the base.
Testing
3
WARNING
10. Restore system power.
READ BEFORE TESTING
11. Test the thermostat according to the procedure in the
• Do not short across terminals on the gas valve or at the heating
or cooling system control board to test the thermostat installation.
This could damage the thermostat and void the warranty.
• Do not select COOL mode if the outside temperature is below
50° F (10° C). This could damage the controlled cooling system and
cause personal injury.
Test section for the connected HVAC system.
12. Set the time and date on the thermostat. See the
“Keypad Operation Guide.”
13. Review the default program schedules in the “Keypad
• Ensure the power supply is correct and the display is reading
current room temperature.
Operation Guide” and adjust as necessary.
14. When you are ready to commission the wireless network,
see Joining the ZigBee Wireless Network.
2
| General | Details |
|---|---|
| Name | GE current WTS10 Daintree Wireless Thermostat Installation Guide |
| Make | GE current |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.15 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T827 Series Programmable Thermostat Owner’s Manual
Robertshaw RS10420T WIFI Programmable Thermostat User Guide
CYDATA CY917B Daisy Wi-Fi Thermostat User Guide
Roth Basicline 230T Programmable Clock Thermostat Instruction Manual
Danfoss GreenCon RC-C2/C4 Room Thermostat Installation Guide
HERSCHEL 12860 T-BT Battery Powered Wireless Thermostat Instruction Manual
Honeywell DT90A Digital Room Thermostat User Guide
expert4house BHT-006 Series Thermostat Instruction Manual
GENERAL LIFE HT250S Digital Room Thermostat User Manual
Guangzhou XR-01 Central Air Conditioning Thermostat User Manual