Home > Thermostat > Digital Touch Thermostat Troubleshooting User Guide

Digital Touch Thermostat Troubleshooting User Guide

3. No display on the screen

Firstly check that the unit has power to it. If there is power, make sure the wiring is in the unit

correctly, the incoming power needs to be in terminals 3 and 4 and the heaꢀng mat goes into 1 and

2. If everything is wired in correctly then check that the thin cable that goes from the unit to the

faceplate is plugged in correctly and has not been damaged.

4. Unable to separate the front from the backplate

The faceplate slides up from the black metal backplate and wiring terminal so it can be

disconnected. To do this hold the top of the wiring terminal on the back with your ﬁngers and

apply pressure with your thumbs from the boꢁom upwards, you will hear a click when the unit

has separated. This can be sꢀꢂ when the unit is new so may need a ﬁrmer press if it is the ﬁrst

ꢀme.

Ensure that you are careful when separaꢀng them to ensure you do not cause any damage to the

LCD ribbon cable inside. The LCD ribbon needs to be unclipped from the board before you

completely separate the unit.

General	Details
Name	Digital Touch Thermostat Troubleshooting User Guide
Make	Thermostat
Language	English
Filetype	PDF (Download)
File size	0.13 MB

(1 votes, average: 5.00 out of 5)

Comments are closed.

Thermostat Instructions & User Manuals