Home > BEOK > BEOK BOT306RF-WIFI Thermostat Owner’s Manual

BEOK BOT306RF-WIFI Thermostat Owner’s Manual

6. Advanced Setting: Long Press Senior  
setting mode:  
, you will go into Advanced  
to switch manual  
7. Switch of Manual mode and Auto mode: Press  
mode or Auto mode.  
8.Power off : Press  
to turn on or off thermostat.  
CHK(Check) Code  
X. Installation Instruction  
All SN are correct. CHK code is same.  
The forth step, after SN is finished setting, if CHK Code is the same with  
bar code, it is correct. If not consistent, it is not correct. Please input again.  
3.VAC: Control valves1-8 place numbers. The default value is 01.  
(This setting is only useful when thermostat is applied to control Wireless  
Main-Control Centralized Controller. If thermostat is used to control boiler,  
this setting must be 01.)  
XII. ATT:  
Thank you for buying this product!  
Please read this manual for complete instructions on installing and  
operating your thermostat. If you require further assistance, please  
feel free to contact us.  
In the box you will find:  
Model  
BOT-W306 BOT-X306  
BOT306RF-WIFI  
Thermostat  
User Manual  
Screws  
Receiver  
USB Cable  
Insert the equipped USB (Type-C) connector into the charger.  
Support Bracket  
XI. Set Sequence Number  
Our Service:  
We offer the warranty of 24 months from the sales day.  
1. Every thermostat has a matched receiver, and thermostat and receiver  
have a same group of sequence number. If user mix during installation,  
sequence number can be set through the following method.(Sequence  
number is unique)  
During the warranty, if it is belong to the quality issue, we will fix or  
replace them for you by free after test them.  
If it is not quality problem or beyond the warranty time, we will  
charge for the after-sales service.  
BEOK  
2. In Advance Setting, SNP need to be set 01. Then to set SN through the  
following four steps.  
Boiler Thermostat  
BOT306 Series  
1. Press  
button  
Power Off State  
2. Press  
button  
The first step, press button under power off state, then press button,  
then press button to enter parameter setting;  
Modify to be right numbers  
The second step, after appearing SN1, press or to modify the number;  
Modify to be right numbers  
Appear SN2-SN6 in order  
The third step, every time pressing once , it will appear SN2, SN3, SN4,  
SN5 and SN6 in order. Refer to second step, press or to modify.  
GeneralDetails
NameBEOK BOT306RF-WIFI Thermostat Owner’s Manual
MakeBEOK
LanguageEnglish
FiletypePDF (Download)
File size0.31 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BEOK Color TFT-LCD Heating Thermostat User Manual
BEOK Color TFT-LCD Heating Thermostat User Manual
BEOK TDS21WIFI-AC Fan Coil Thermostat Instruction Manual
BEOK TDS21WIFI-AC Fan Coil Thermostat Instruction Manual
BEOK TGR85-EP Underfloor Heating Thermostat User Guide
BEOK TGR85-EP Underfloor Heating Thermostat User Guide
BEOK TDR89 Zigbee Room Thermostat User Guide
BEOK TDR89 Zigbee Room Thermostat User Guide
BEOK BOT-R7X Wireless Gas Boiler Heating Thermostat Instruction Manual
BEOK BOT-R7X Wireless Gas Boiler Heating Thermostat Instruction Manual
BEOK TDS23 Wi-Fi Fan Coil Thermostat Instruction Manual
BEOK TDS23 Wi-Fi Fan Coil Thermostat Instruction Manual
BEOK TGP53 China Piano Buttons Underfloor Heating Thermostat User Guide
BEOK TGP53 China Piano Buttons Underfloor Heating Thermostat User Guide
beok TGW60 Thermostat User Guide
beok TGW60 Thermostat User Guide
BEOK TS4 Series Wi-Fi Touch Screen Thermostat User Manual
BEOK TS4 Series Wi-Fi Touch Screen Thermostat User Manual
BEOK TGP53 Wifi Thermostat User Guide
BEOK TGP53 Wifi Thermostat User Guide

BEOK BOT306RF-WIFI Thermostat Owner’s Manual